Non-collinear upconversion of incoherent light: designing infrared spectrometers and imaging systems

Jeppe Seidelin Dam; Qi Hu; Christian Pedersen; Peter Tidemand-Lichtenberg

doi:10.1117/12.2039658

20 February 2014 Non-collinear upconversion of incoherent light: designing infrared spectrometers and imaging systems

Jeppe Seidelin Dam, Qi Hu, Christian Pedersen, Peter Tidemand-Lichtenberg

Proceedings Volume 8964, Nonlinear Frequency Generation and Conversion: Materials, Devices, and Applications XIII; 89640F (2014) https://doi.org/10.1117/12.2039658
Event: SPIE LASE, 2014, San Francisco, California, United States

Abstract

Upconversion of incoherent mid-infrared radiation to near visible wavelengths, offers very attractive sensitivity compared to conventional means of infrared detection. Incoherent light, focused into a nonlinear crystal, results in noncollinear phase matching of a narrow range of wavelengths for each angle of propagation. Non-collinear phase matching has been an area of limited attention for many years due to inherent incompatibility with tightly focused laser beams typically used for most second order processes in order to achieve acceptable conversion efficiency. The development of periodically poled crystals have allowed for non-critical collinear phase matching of most wavelengths, virtually eliminating the need for non-collinear phase matching. When considering upconversion of thermal light, spectral radiance is limited due to the finite temperature of the Planck radiation source. It is, however, straightforward to increase the incoherent power by increasing the receiving aperture of the upconversion unit i.e. the diameter of the upconversion laser beam. Hence, the optimal conversion efficiency for incoherent light is not achieved by tightly focused beams. In this paper we show that filling the nonlinear crystal with as large a pump beam as possible yields the best conversion as this allows for upconversion of large angles of incoming incoherent light. We present results of non-collinear mixing and how it affects spectral and spatial resolution in the image and compare against experiments. We finally discuss how it can be used to design and predict system performance and how incoherent upconversion can be used for mid-IR spectroscopy and imaging.

Citation Download Citation

Jeppe Seidelin Dam, Qi Hu, Christian Pedersen, and Peter Tidemand-Lichtenberg "Non-collinear upconversion of incoherent light: designing infrared spectrometers and imaging systems", Proc. SPIE 8964, Nonlinear Frequency Generation and Conversion: Materials, Devices, and Applications XIII, 89640F (20 February 2014); https://doi.org/10.1117/12.2039658

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available