Paper
8 March 2014 Pitch control of multi-channel graded-index core polymer waveguide for optical PCB using the Mosquito method
Author Affiliations +
Proceedings Volume 8991, Optical Interconnects XIV; 899119 (2014) https://doi.org/10.1117/12.2039105
Event: SPIE OPTO, 2014, San Francisco, California, United States
Abstract
We successfully fabricate multi-channel GI circular-core polymer waveguides with precisely controlled pitches utilizing the Mosquito method. The Mosquito method is a very simple method for fabricating GI-core polymer optical waveguides that utilizes a micro dispenser. In this method, a viscous core monomer is directly dispensed into a cladding monomer layer before UV cured, and circular cores are formed by curing both the core and cladding under a UV exposure. Here, it is a concern that a needle position accuracy influences on the interchannel pitch when parallel cores are fabricated by parallel repetitive scan of a single needle. However, we succeeded in controlling the pitch with the Mosquito method and then, GI-core waveguides with 250.7±5.2 μm, 126.7±2.6 μm and 61.7±3.4 μm are successfully fabricated for the pre-set values of 250 μm, 125 μm and 62.5 μm, respectively. Then, we demonstrate a 4 × 10 Gbps transmission over the fabricated GI-core waveguide by connecting the waveguide to an MMF ribbon with a 250-μm pitch, which is realized because the pitch of the fabricated waveguide is accurately controlled to 250 μm.
© (2014) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Ryota Kinoshita, Daisuke Suganuma, and Takaaki Ishigure "Pitch control of multi-channel graded-index core polymer waveguide for optical PCB using the Mosquito method", Proc. SPIE 8991, Optical Interconnects XIV, 899119 (8 March 2014); https://doi.org/10.1117/12.2039105
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Waveguides

Polymers

Polymer multimode waveguides

Cladding

Vertical cavity surface emitting lasers

Optical interconnects

Optical printed circuit boards

Back to Top