Paper
1 May 2014 Semiconductor saturable absorber mirror passively Q-switched 2.97 μm fluoride fiber laser
Author Affiliations +
Abstract
A diode-cladding-pumped mid-infrared passively Q-switched Ho3+-doped fluoride fiber laser using a reverse designed broad band semiconductor saturable mirror (SESAM) was demonstrated. Nonlinear reflectivity of the SESAM was measured using an in-house Yb3+-doped mode-locked fiber laser at 1062 nm. Stable pulse train was produced at a slope efficient of 12.1% with respect to the launched pump power. Maximum pulse energy of 6.65 μJ with a pulse width of 1.68 μs and signal to noise ratio (SNR) of ~50 dB was achieved at a repetition rate of 47.6 kHz and center wavelength of 2.971 μm. To the best of our knowledge, this is the first 3 μm region SESAM based Q-switched fiber laser with the highest average power and pulse energy, as well as the longest wavelength from mid-infrared passively Q-switched fluoride fiber lasers.
© (2014) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Jianfeng Li, Hongyu Luo, Yulian He, Yong Liu, Binbin Luo, Zhongyuan Sun, Lin Zhang, and Sergei K. Turitsyn "Semiconductor saturable absorber mirror passively Q-switched 2.97 μm fluoride fiber laser", Proc. SPIE 9135, Laser Sources and Applications II, 913504 (1 May 2014); https://doi.org/10.1117/12.2053893
Lens.org Logo
CITATIONS
Cited by 11 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Fiber lasers

Q switched lasers

Q switching

Mirrors

Reflectivity

ZBLAN

Mid-IR

Back to Top