Paper
2 June 2014 N optical fiber coupler based on a polyhedral gradient index lens
Yuanhong Yang, Wen Dai, Kuiyan Song, Wei Jin
Author Affiliations +
Proceedings Volume 9157, 23rd International Conference on Optical Fibre Sensors; 9157AF (2014) https://doi.org/10.1117/12.2058764
Event: OFS2014 23rd International Conference on Optical Fiber Sensors, 2014, Santander, Spain
Abstract
A method for building a 1×N fiber coupler based on a single polyhedral gradient-index lens (p-GRIN) is proposed. One end of the p-GRIN has polyhedral convex cone shape with N surfaces and is used as the light input port, while the other end is flat and used as the output port. When light from a single mode optical fiber illuminates the input end of the p- GRIN, N spatially separated light beams are generated at the output end and coupled respectively into N different output fibers. Results obtained from ray-tracing agree well with simulation results from the ZEMAX software. The output beam positions and light coupling efficiency to optical fibers could be optimized by adjusting the input cone angle and the distance between input fiber end and cone tip. This method may be adapted for any type of optical fibers and provide a practical solution for light coupling between single- and multi-core fibers.
© (2014) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Yuanhong Yang, Wen Dai, Kuiyan Song, and Wei Jin "1×N optical fiber coupler based on a polyhedral gradient index lens", Proc. SPIE 9157, 23rd International Conference on Optical Fibre Sensors, 9157AF (2 June 2014); https://doi.org/10.1117/12.2058764
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
GRIN lenses

Optical fibers

Fiber couplers

Zemax

Ray tracing

Beam splitters

Refractive index

Back to Top