Paper
5 September 2014 Fiber optic force sensor: application to automotive industry
Nicolas Javahiraly, Ayoub Chakari
Author Affiliations +
Abstract
We propose the study and the design of an ultra sensitive polarimetric torque sensor. The principle is based on the measurement of the torsion angle  induced on the shaft when a torque T is applied on it. This optical torque sensor has been tested for Aluminum, Steel and Plexiglas shafts with different geometries. The torsion angle has been measured with 0,001° accuracy. The torsion angle is then studied as a function of the applied torque. The comparison between the theoretical and the experimental results give us respectively 4.33%, 1.30% and 1.24% for the Plexiglas, the Aluminum and the Steel shafts. These results permit us good perspectives for our applications
© (2014) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Nicolas Javahiraly and Ayoub Chakari "Fiber optic force sensor: application to automotive industry", Proc. SPIE 9202, Photonics Applications for Aviation, Aerospace, Commercial, and Harsh Environments V, 920205 (5 September 2014); https://doi.org/10.1117/12.2083402
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Polarization

Sensors

Aluminum

Polymethylmethacrylate

Fiber optics sensors

Wave plates

Polarimetry

Back to Top