Paper
4 March 2016 High-repetition rate, picosecond-pulse, tunable, mid-IR PPLN OPG source
Author Affiliations +
Abstract
We report here on the performance of a narrow-line, mid-IR source based on a PPLN-crystal optical parametric generator (OPG). The crystal was pumped by a pulsed, 20-MHz-rate, 1064-nm Yb:fiber-based source operating with 20- psec pulses. The OPG produced a broad spectrum between 2027 nm and 2239 nm. By placing a band-pass filter after the OPG we were able to select a 30-nm bandwidth output, and we achieved further line reduction (0.7 nm) and 4.5 mW of average power at 2039 nm, using a reflective Volume Bragg Grating (VBG). Devices such as piezo-controlled etalons can provide rapidly tunable, narrow-linewidth power from this system.
© (2016) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Yelena Isyanova, Wenyan Tian, and Peter F. Moulton "High-repetition rate, picosecond-pulse, tunable, mid-IR PPLN OPG source", Proc. SPIE 9731, Nonlinear Frequency Generation and Conversion: Materials, Devices, and Applications XV, 97310W (4 March 2016); https://doi.org/10.1117/12.2211902
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Crystals

Diodes

Optical isolators

Laser crystals

Optical filters

Mid-IR

Fiber lasers

RELATED CONTENT

Ho3+ LLF MOPA pumped RISTRA ZGP OPO at 3 5...
Proceedings of SPIE (March 12 2013)
Compact mid IR source based on a DFB diode, fiber...
Proceedings of SPIE (March 22 2013)
Single crystal fiber for laser sources
Proceedings of SPIE (March 26 2015)
High-peak-power pulsed fiber sources
Proceedings of SPIE (September 20 2004)
Pulsed Tm-doped fiber lasers for mid-IR frequency conversion
Proceedings of SPIE (February 19 2009)

Back to Top