Paper
4 March 2016 CFRP bonding pre-treatment with laser radiation of 3 μm wavelength: laser/material interaction
Author Affiliations +
Proceedings Volume 9736, Laser-based Micro- and Nanoprocessing X; 973614 (2016) https://doi.org/10.1117/12.2209514
Event: SPIE LASE, 2016, San Francisco, California, United States
Abstract
Laser radiation of 3 μm wavelength was generated by frequency conversion of an industrial IR laser and applied in the context of CFRP bonding pre-treatment. Reinforced and non-reinforced epoxy resins were treated with this radiation varying the relevant parameters such as laser power or treatment time. The interaction between laser radiation of 3012 nm and 1064 nm wavelength and matrix resin was analyzed mechanically (e.g. ablation depth), optically (such as fiber exposure) and chemically (e.g. contamination removal). The results gathered show that, even with the small achievable pulse fluences, a sufficient treatment of the specimens and a sensitive removing of the contaminated layers are possible.
© (2016) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
David Blass, Stefan Kreling, Sebastian Nyga, Thomas Westphalen, Bernd Jungbluth, Hans-Dieter Hoffman, and Klaus Dilger "CFRP bonding pre-treatment with laser radiation of 3 μm wavelength: laser/material interaction", Proc. SPIE 9736, Laser-based Micro- and Nanoprocessing X, 973614 (4 March 2016); https://doi.org/10.1117/12.2209514
Lens.org Logo
CITATIONS
Cited by 3 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Laser ablation

Absorption

Fiber lasers

Contamination

Epoxies

Optical parametric oscillators

Laser sources

Back to Top