Position-controlled MOVPE growth and electro-optical characterization of core-shell InGaN/GaN microrod LEDs

Tilman Schimpke; H.-J. Lugauer; A. Avramescu; T. Varghese; A. Koller; J. Hartmann; J. Ledig; A. Waag; M. Strassburg

doi:10.1117/12.2214122

8 March 2016 Position-controlled MOVPE growth and electro-optical characterization of core-shell InGaN/GaN microrod LEDs

Tilman Schimpke, H.-J. Lugauer, A. Avramescu, T. Varghese, A. Koller, J. Hartmann, J. Ledig, A. Waag, M. Strassburg

Author Affiliations +

Proceedings Volume 9768, Light-Emitting Diodes: Materials, Devices, and Applications for Solid State Lighting XX; 97680T (2016) https://doi.org/10.1117/12.2214122
Event: SPIE OPTO, 2016, San Francisco, California, United States

Abstract

Today’s InGaN-based white LEDs still suffer from a significant efficiency reduction at elevated current densities, the so-called “Droop”. Core-shell microrods, with quantum wells (QWs) covering their entire surface, enable a tremendous increase in active area scaling with the rod’s aspect ratio. Enlarging the active area on a given footprint area is a viable and cost effective route to mitigate the droop by effectively reducing the local current density. Microrods were grown in a large volume metal-organic vapor phase epitaxy (MOVPE) reactor on GaN-on-sapphire substrates with a thin, patterned SiO2 mask for position control. Out of the mask openings, pencil-shaped n-doped GaN microrod cores were grown under conditions favoring 3D growth. In a second growth step, these cores are covered with a shell containing a quantum well and a p-n junction to form LED structures. The emission from the QWs on the different facets was studied using resonant temperature-dependent photoluminescence (PL) and cathodoluminescence (CL) measurements. The crystal quality of the structures was investigated by transmission electron microscopy (TEM) showing the absence of extended defects like threading dislocations in the 3D core. In order to fabricate LED chips, dedicated processes were developed to accommodate for the special requirements of the 3D geometry. The electrical and optical properties of ensembles of tens of thousands microrods connected in parallel are discussed.

Citation Download Citation

Tilman Schimpke, H.-J. Lugauer, A. Avramescu, T. Varghese, A. Koller, J. Hartmann, J. Ledig, A. Waag, and M. Strassburg "Position-controlled MOVPE growth and electro-optical characterization of core-shell InGaN/GaN microrod LEDs", Proc. SPIE 9768, Light-Emitting Diodes: Materials, Devices, and Applications for Solid State Lighting XX, 97680T (8 March 2016); https://doi.org/10.1117/12.2214122

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available