SignificanceIn the analysis of two-layered turbid dental tissues, the outer finite-thickness layer is modeled by an optical transport coefficient distinct from its underlying semi-infinite substrate layer. The optical and thermophysical parameters of healthy and carious teeth across the various wavelengths were measured leading to the determination of the degree of reliability of each of the fitted parameters, with most reliable being thermal diffusivity and conductivity, enamel thickness, and optical transport coefficient of the enamel layer. Quantitative pixel-by-pixel images of the key reliable optical and thermophysical parameters were constructed. AimWe introduced a theoretical model of pulsed photothermal radiometry based on conduction-radiation theory and applied to quantitative photothermal detection and imaging of biomaterials. The theoretical model integrates a combination of inverse Fourier transformation techniques, avoiding the conventional cumbersome analytical Laplace transform method. ApproachTwo dental samples were selected for analysis: the first sample featured controlled, artificially induced early caries on a healthy tooth surface, while the second sample exhibited natural defects along with an internal filling. Using an Nd:YAG laser and specific optical parametric oscillator (OPO) wavelengths (675, 700, 750, and 808 nm), photothermal transient signals were captured from different points on these teeth and analyzed as a function of OPO wavelength. Measurements were also performed with an 808-nm laser diode for comparison with the same OPO wavelength excitation, particularly for the second sample with natural defects. ResultsThe findings demonstrated that the photothermal transient signals exhibit a fast-decaying pattern at shorter wavelengths due to their higher scattering nature, while increased scattering and absorption in the carious regions masked conductive and radiative contributions from the underlayer. These observations were cross-validated using micro-computed tomography, which also enabled the examination of signal patterns at different tooth locations. ConclusionsThe results of our study showed the impact of optical and thermal characteristics of two-layered turbid dental tissues via an inverse Fourier technique, as well as the interactions between these layers, on the patterns observed in depth profiles.
|
