1 February 2006 Optimization of layer-by-layer electrostatic self-assembly processing parameters for optical biosensing
Helen Shibru, Yan Zhang, Kristie L. Cooper, Gary R. Pickrell, Anbo Wang
Author Affiliations +
Abstract
The effect of layer-by-layer electrostatic self-assembly processing parameters on resulting thin-film characteristics was determined in order to optimize the thin-film structure for optical biosensing. The use of long-period fiber gratings (LPFGs) requires careful control of the refractive index of the surrounding medium, which can be achieved by tuning the refractive index and thickness of an optical thin film deposited directly on the optical fiber surface. The high-sensitivity LPFG refractometry range falls in a window just below the effective index of the relevant cladding mode. We investigated five factors at two levels using variable-angle spectroscopic ellipsometry and analysis of variance. Salt concentration and pH were found to be critical parameters for refractive index control.
©(2006) Society of Photo-Optical Instrumentation Engineers (SPIE)
Helen Shibru, Yan Zhang, Kristie L. Cooper, Gary R. Pickrell, and Anbo Wang "Optimization of layer-by-layer electrostatic self-assembly processing parameters for optical biosensing," Optical Engineering 45(2), 024401 (1 February 2006). https://doi.org/10.1117/1.2167090
Published: 1 February 2006
Lens.org Logo
CITATIONS
Cited by 13 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Polymers

Signal to noise ratio

Cladding

Composites

Thin films

Refractive index

Biosensing

Back to Top