24 November 2017 Volatile organic compound and semivolatile organic compound outgassing rates for ethylene propylene diene monomer and fluoropolymer seals
Author Affiliations +
Abstract
High-power laser facilities, such as Laser MegaJoule, are currently being operated for inertial confinement fusion experiments. Emission of volatile organic compounds (VOC) and moreover semivolatile organic compounds (SVOCs) from seals in laser environment is of tremendous importance for the optics lifetime and laser performance. That is why all the seals were screening in the same conditions: 48 h at 30°C and three successive cycle of 1.5 h at 50°C. This paper focuses on the qualification test performed on three seals: two ethylene propylene diene monomer (EPDM) and one fluoropolymer (FPM). It is shown that the molded and the extruded EPDM do not outgas the same amount neither the same molecules whereas EPDM and FPM outgas nearly the same level of phthalates.
© 2017 Society of Photo-Optical Instrumentation Engineers (SPIE) 0091-3286/2017/$25.00 © 2017 SPIE
Isabelle Tovena Pecault "Volatile organic compound and semivolatile organic compound outgassing rates for ethylene propylene diene monomer and fluoropolymer seals," Optical Engineering 56(11), 115108 (24 November 2017). https://doi.org/10.1117/1.OE.56.11.115108
Received: 29 May 2017; Accepted: 6 November 2017; Published: 24 November 2017
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Molecules

Contamination

Optical engineering

Pollution control

Laser optics

Natural surfaces

Adsorption

Back to Top