Tapered optical fiber sensor (TOFS) devices are attractive as biosensors due to their higher sensitivity, accurate measurement capabilities, and real-time operation. The tapered region allows the evanescent electromagnetic (EM) field to extend outside the fiber to enable the detection of minute changes in the refractive index in close proximity to the tapered region. The sensing is achieved using appropriate functionalized tapered fiber surfaces. In this work, a second generation (2G) automated compact TOFS system developed in our lab is tested, and repeatable and stable signals are obtained proving that this device potentially can serve as a portable bio/chemical sensor in the future. Preliminary simulations, using a FFT based split-step beam propagation method, of optical propagation through a tapered fiber leading to the detected signal as a function of scanning wavelength and its phase shift with cladding refractive index are presented.
A practical tapered optical fiber (TOF) biosensing system was developed for label-free detection using antigen-antibody pairs with repeatable results and a very high degree of sensitivity. This was done by attaching molecular recognition agents to a tapered fiber surface for augmenting sensitivity and specificity of analyte. The entire system included three main parts: a tunable laser, a tapered fiber, and an optical detector. Light from an unpolarized tunable fiber laser was introduced into the tapered fiber from one end, and the transmitted intensity was detected by a photodetector. In the tapered fiber area, the evanescent electromagnetic field, which extends outside the fiber, was able to detect minute changes in the refractive index caused by antigen-antibody pairs. Recorded data was analyzed using an innovative Fourier analysis method to find phase changes, which are directly related to the biomolecular concentration coated on fiber, from which antibody-antigen concentrations are obtained. Two experiments were performed to confirm the concept using two very different agents. The first was the protein Interleukin-8 (IL-8). Repeatable results with a sensitivity of 10 pg/mL were achieved. The second was human coronavirus OC43 (HCoV-OC43), a surrogate viral particle for SARS-CoV-2, with a sensitivity of 50 viruses/mL. Critical sources of error were identified and addressed for the purpose of using the device for real clinical diagnosis in various real-life environments, where viruses can reside in water, phosphate-buffer solution, or saliva, the most popular three environments in real clinical diagnosis. Our device was designed according to the principle that only one specific kind of antibody and antigen can be combined together. The device demonstrated good accuracy to chosen analyte(s) tailored to specific applications and offered the potential to develop a point-of-care device used in clinics, as well as for detecting a variety of viruses and biocontaminants. The reproducibility of TOFs was confirmed through multiple fabrications and consistent results.
Head and neck squamous cell carcinoma (HNSCC) is a fatal disease with 650,000 newly diagnosed cases worldwide. Early detection of this cancer improves survival significantly. Salivary biomarker analysis demonstrates that screening of HNSCC is possible and potentially improves survival. Interleukin-8 (IL-8), a cytokine produced in abundance by the HNSCC stem cells, induces epithelial-mesenchymal transformation (EMT), enhances metastasis, and can be used as a salivary biomarker for HNSCC screening. A healthy individual has 300 – 500 picogram/ml (pg/ml) in saliva, while HNSCC patients have 1700 – 2500 pg/ml. We have developed a novel tapered optical fiber biosensing system for label-free detection of antigens by attaching a molecular recognition agent to a tapered fiber surface for augmenting sensitivity and specificity of the analyte. In a tapered fiber, the evanescent electromagnetic field, which extends outside the fiber, is able to detect minute changes of the refractive index caused by the environment. The evanescent field intensity exponentially decreases with distance away from the surface of the fiber on a length scale in the order of the wavelength of light. Light from a tunable fiber laser is introduced into the tapered fiber from one end and the transmitted intensity is detected by a photodetector. Received data is then analyzed using Fourier transformation to find phase changes related to the biomolecular coating of the fiber, which is directly related to the antigen concentration. Real-time measurement of antigen concentrations at the level of 10 pg/ml is shown to be possible by successful integration of hardware and software systems. This approach has the potential to develop a pointof-care device to be used in the clinics.
In this paper we theoretically study the responsivity of Metal-Insulator-Metal nanostructures to light illumination over a broad wavelength band (1 - 25 microns) and we examine the role of a local field enhancement and electrostatic field on the responsivity.
We present experimental results of second harmonic generation enhancement through the resonance of the band edge in a photonic crystal based on lithium niobate. Proton exchange technique was used to fabricate a waveguide near the surface of the lithium niobate substrate. The photonic crystal structure over the waveguide was made by UV laser interferometry. Subsequently experiments were designed to quantify the Cerenkov second-harmonic generation (CSHG) radiated into the substrate. The SHG radiated inside the waveguides was also experimentally investigated. In our experiments, the second guided mode of the waveguide was tuned to the band edge resonance to enhance the second harmonic generation. The highest conversion efficiency of CSHG using photonic band gap (PBG) was around 50 times compared to SHG emission from non-patterned lithium niobate. A numerical model was used to corroborate the experimental result. It was also found that the SHG signal in the waveguides is quenched compared to the CSHG signal.
A new free-space multistage optical interconnection network which is called the Comega interconnection network is presented. It has the same topological construction for the cascade stages of the Comega interconnection. The concept of the left Comega and the right Comega interconnection networks are given to describe the whole Comega interconnection network. The matrix theory for the Comega interconnection network is presented. The route controlling of the Comega interconnection network is decided based on the matrix analysis. The node switching states in cascade stages of the 8 by 8 Comega interconnection network for the route selection are given. The data communications between arbitrary input channel with arbitrary output channel can be performed easily.
An optoelectronic switching network with 2-D optical fiber bundle arrays I/O access device is presented in this paper. An optoelectronic recirculating Banyan network based on CMOS/SEED smart pixel device is used in this configuration. Thirty-two X two single-mode fiber bundle array and 32 X 2 multi- mode fiber bundle array are fabricated respectively based on the features of high density, high precision and array permutation of the CMOS/SEED optoelectronic integrated devices. The measuring results show that the center to center spacing between adjacent optical fibers in the same layer of the fiber array is 125 micrometer, and the spacing between adjacent layers is 500 micrometer. Displacing tolerance of the fiber bundle arrays is less than 2 micrometer and the angular tilt error is less than 0.02 degree.
A 16 X 16 Crossover photonic switching network with hybrid integrated CMOS/SEED smart pixel device and 2D optical fiber bundle array I/O access device is reported in this paper. SEEd array devices ar used as light receivers and transmitters, while CMOS devices make efficient logical processing. 4 X 40 2D multilayer optical fiber bundle arrays are fabricated and are used as I/O access devices in the crossover photonic switching network. The center to center spacing between adjacent optical fibers in the same layer of the fiber array is 125micrometers , and the spacing between adjacent layers is 250micrometers . Displacing tolerance of the fiber bundle arrays is less than 4 micrometers and the angular tilt error is less than 0.03 degree. It has the feature of high density, high precision, array permutation and easy to couple with 2D CMOS/SEED smart pixel device.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.