We describe the state of the development of a coherence scanning interferometer to measure local changes in topology and local induced vibrations of a mirror at cryogenic temperatures. The metrology instrument incorporates an optical phase mask and a microlenses array, enabling the acquisition of complete white light interferograms within a single-camera frame. This stands in contrast to traditional temporal phase-shifting interferometers. We design the optical phase mask as a combination of steps of different thicknesses, so each step introduces a different optical path difference to the rays. The local interferograms for each camera frame provide us with information on the local topology of the mirror. The interferogram displacement between camera frames allows us to monitor the mirror’s local induced vibrations. In this work, we report the metrology instrument’s working principle through numerical simulations and present the latest results of a proof of concept developed at the laboratory. The metrology instrument shown is of extensive usability in diverse applications related to real-time measurements of various fast physical processes and real-time characterization of the optical components topology.
We present the experimental results of the proof of concept of a metrology instrument developed to characterize the cryogenic mirror of the Einstein Telescope (ET) prototype. ET is a proposed gravitational-wave observatory. The metrology instrument uses the principle of low-coherence interferometry to measure the local change in topology and local induced vibrations of the mirror resulting from the cooling down process. We implement an innovative optical phase mask and a microlens array to obtain a depth map of the mirror on a single camera frame. With our instrument prototype, we can obtain 25 interference patterns of the same mirror spot for each camera frame. Each interference pattern corresponds to a difference Optical Path Difference (OPD). Then by reconstructing the interference patterns, we can measure the mirror’s local topology change and local induced vibration. Moreover, in this proceeding, we describe the analysis of the white-light interference patterns through numerical simulations and depict the metrology instrument’s optical design. Finally, we discuss how we can use the metrology instrument for real-time characterization of other optical components with all the advantages of white light interferometry.
We describe the state of development of a white light interferometer to characterize the cryogenic mirrors for GW detector on operation. We include the first experimental results from the proof of concept of the metrology instrument. The instrument will characterize the topology as well as the vibration of the mirrors. This development takes place in the frame of the E-TEST project. E-TEST is one of the technology demonstrators for the future Einstein Telescope (ET). ET is dedicated to the measure and characterization of gravitational waves. The prototype built by E-TEST includes a large silicon mirror of 40 cm diameter suspended by innovative vibration isolation hanging modules. To reach the detection specification, the mirror is cooled down at cryogenic temperatures around 20 K. Nevertheless, even after the isolation, the mirror may not reach perfect stability once at cryogenic temperatures. Furthermore, the mirror may experience surface topology changes and wavefront deformation due to the extreme variations in temperature and gradient. With our metrology instrument, we can obtain on a single camera frame a set of interferogram maps of the area observed on the mirror at different optical path differences. To do this, we design an innovative phase mask for a white light low-coherence interferometer. In addition, we implement new algorithms for the white light interferogram analysis, avoiding the limitations of the conventional Phase Shifting Interferometry algorithms.
The E-TEST project builds a prototype for the Einstein Telescope (ET). ET is a proposed gravitational-wave observatory. E-TEST includes a silicon mirror of 30 cm up to 40 cm diameter, suspended and cooled down at cryogenic temperatures from 20 K to 30 K. During the cooling down, the mirror will be affected by surface topology changes, wavefront deformation, and induced vibrations. We present a metrology device based on short-coherence interferometry to characterize the mirror surface with a sub-nanometer resolution. We design an innovative phase mask to achieve dynamic or single-frame white light interferometry. Moreover, we discuss different interferogram analysis methods. We also discuss the implementation of a long-coherence source to facilitate the measurements with the low-coherence source.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.