The advent of back-illuminated complementary metal–oxide–semiconductor (CMOS) sensors and their well-known advantages over charge-coupled devices make them an attractive technology for future X-ray missions. However, numerous challenges remain, including improving their depletion depth and identifying effective methods to calculate per-pixel gain conversion. We have tested a commercial Sony IMX290LLR CMOS sensor under X-ray light using an Fe55 radioactive source and collected X-ray photons for ∼15 consecutive days under stable conditions at regulated temperatures of 21°C and 26°C. At each temperature, the data set contained enough X-ray photons to produce one spectrum per pixel consisting only of single-pixel events. We determined the gain dispersion of its 2.1 million pixels using the peak fitting and the energy calibration via correlation (ECC) methods. We measured a gain dispersion of 0.4% at both temperatures and demonstrated the advantage of the ECC method in the case of spectra with low statistics. The energy resolution at 5.9 keV after the per-pixel gain correction is improved by ≳10 eV for single-pixel and all event spectra, with single-pixel event energy resolution reaching 123.6±0.2 eV, close to the Fano limit of silicon sensors at room temperature. Finally, our long data acquisition demonstrated the excellent stability of the detector over more than 30 days under a flux of 104 photons per second.
The Wide-Field Infrared Transient Explorer (WINTER) is a new fully robotic infrared time-domain survey instrument at the Palomar Observatory, commissioned in June 2023. WINTER is performing a seeing-limited time domain survey of the infrared (IR) sky to detect, discover, and characterize astrophysical time-domain phenomena. As a dedicated observatory for real-time detection and rapid follow-up of infrared transient and variable targets, WINTER represents a new capability for multi-messenger astrophysics. We will describe the robotic software architecture of the WINTER Supervisor Program (WSP) which handles autonomous scheduling of both surveys and target-of-opportunity interrupts, as well as control and remote monitoring of the observatory, telescope, and cameras.
The Wide-Field Infrared Transient Explorer (WINTER) is a new near-infrared time-domain survey instrument installed on a dedicated 1-meter robotic telescope at Palomar Observatory in June of 2023. WINTER’s science goals include robotic follow-up of kilonovae from binary neutron star (BNS) and neutron-star black-hole (NSBH) mergers, surveys to study galactic and extragalactic transients and variables, along with building up a deep, coadded image of the near-infrared sky. The project also serves as a technology demonstration for new large-format Indium Gallium Arsenide (InGaAs) detectors for cost-effective near-infrared photometry without cryogenic cooling. WINTER’s custom camera combines six InGaAs detectors as a first run of a newly-designed 1920 x 1080 pixel read out integrated circuit (ROIC). It uses a novel tiled fly’s-eye optical design to cover a > 1 degree-squared field of view in Y-, J-, and shortened-H-band filters (0.9-1.7μm). The survey currently operates with a median limiting magnitude of JAB ≈ 18.5, running nightly robotic surveys and target of opportunity programs. In parallel to these science programs, there is ongoing work to improve WINTER’s performance, which shows a factor of ∼ 10 decreased instrument efficiency from the design. Laboratory and on-sky testing suggest the sensor’s InGaAs diode array is performing properly, but sensitivity is being lost during amplification in the ROIC’s pixel amplifier. We present the laboratory and on-sky performance newly-commissioned WINTER observatory along with ongoing and future efforts to improve performance.
The Wide-Field Infrared Transient Explorer (WINTER) is a new time-domain instrument which will perform a seeing-limited survey of the near-infrared sky. Deployed on a dedicated 1-meter robotic telescope at Palomar Observatory, WINTER is designed to study transients of particular interest in the near-infrared including kilo-novae from gravitational-wave sources, supernovae, tidal disruption events, and transiting exoplanets around low mass stars with surveys to a depth of J=21 magnitudes. WINTER’s custom camera combines six commercial large-format Indium Gallium Arsenide (InGaAs) sensors, observing in Y, J, and a short-H (Hs) band filters (0.9-1.7 microns), and employs a novel tiled optical design to cover a >1 degree squared field of view with 90% fill factor. Each wide-format (1920 x 1080 pixels) InGaAs sensor operates at T = -50°C with a thermoelectric cooler, achieving background-limited photometry without cryogenic cooling. The tiled InGaAs sensors result in a wide field-of-view instrument with significant cost savings when compared to HgCdTe sensors. We present WINTER’s novel readout scheme, which includes custom electronics, firmware, and software for low-noise, real-time readout of the InGaAs sensors, including up to a 30x speed up of data reduction using GPUs. This work also outlines the cooling design for warm (T = -50°C) operation of the sensors with a two-stage thermometric cooler, copper heat pipes, and liquid cooling. We conclude with updates on the alignment, integration, and test of the WINTER instrument with a projected first light in Fall 2022.
The Wide-Field Infrared Transient Explorer (WINTER) is a new infrared time-domain survey instrument which will be deployed on a dedicated 1 meter robotic telescope at Palomar Observatory. WINTER will perform a seeing-limited time domain survey of the infrared (IR) sky, with a particular emphasis on identifying r-process material in binary neutron star (BNS) merger remnants detected by LIGO. As a dedicated observatory for real-time detection and rapid follow-up of infrared transient events, WINTER represents a new capability for multi-messenger astrophysics. We present the status of the WINTER instrument, including laboratory characterization and initial results from commissioning at its robotic observatory.
The Wide-Field Infrared Transient Explorer (WINTER) is a new infrared time-domain survey instrument which will be deployed on a dedicated 1 meter robotic telescope at the Palomar Observatory. WINTER will perform a seeing-limited time domain survey of the infrared (IR) sky, with a particular emphasis on identifying r -process material in binary neutron star (BNS) merger remnants detected by LIGO. We describe the scientific goals and survey design of the WINTER instrument. With a dedicated trigger and the ability to map the full LIGO O4 positional error contour in the IR to a distance of 190 Mpc within four hours, WINTER will be a powerful kilonova discovery engine and tool for multi-messenger astrophysics investigations. In addition to follow-up observations of merging binaries, WINTER will facilitate a wide range of time-domain astronomical observations, all the while building up a deep coadded image of the static infrared sky suitable for survey science. WINTER’s custom camera features six commercial large-format Indium Gallium Arsenide (InGaAs) sensors and a tiled optical system which covers a <1-square-degree field of view with 90% fill factor. The instrument observes in Y, J and a short-H (Hs) band tuned to the long-wave cutoff of the InGaAs sensors, covering a wavelength range from 0.9 – 1.7 microns. We present the design of the WINTER instrument and current progress towards final integration at the Palomar Observatory and commissioning planned for mid-2021.
The BLAST Observatory is a proposed super-pressure balloon-borne polarimeter designed for a future ultra- long duration balloon campaign from Wanaka, New Zealand. To maximize scientific output while staying within the stringent super-pressure weight envelope, BLAST will feature new 1.8m off-axis optical system contained within a lightweight monocoque structure gondola. The payload will incorporate a 300 L 4He cryogenic receiver which will cool 8,274 microwave kinetic inductance detectors (MKIDs) to 100mK through the use of an adiabatic demagnetization refrigerator (ADR) in combination with a 3He sorption refrigerator all backed by a liquid helium pumped pot operating at 2 K. The detector readout utilizes a new Xilinx RFSOC-based system which will run the next-generation of the BLAST-TNG KIDPy software. With this instrument we aim to answer outstanding questions about dust dynamics as well as provide community access to the polarized submillimeter sky made possible by high-altitude observing unrestricted by atmospheric transmission. The BLAST Observatory is designed for a minimum 31-day flight of which 70% will be dedicated to observations for BLAST scientific goals and the remaining 30% will be open to proposals from the wider astronomical community through a shared-risk proposals program.
The Next Generation Balloon-borne Large Aperture Submillimeter Telescope (BLAST-TNG) is a submillimeter polarimeter designed to map interstellar dust and galactic foregrounds at 250, 350, and 500 microns during a 24-day Antarctic flight. The BLAST-TNG detector arrays are comprised of 918, 469, and 272 MKID pixels, respectively. The pixels are formed from two orthogonally oriented, crossed, linear-polarization sensitive MKID antennae. The arrays are cooled to sub 300 mK temperatures and stabilized via a closed cycle 3He sorption fridge in combination with a 4He vacuum pot. The detectors are read out through a combination of the second-generation Reconfigurable Open Architecture Computing Hardware (ROACH2) and custom RF electronics designed for BLAST-TNG. The firmware and software designed to readout and characterize these detectors was built from scratch by the BLAST team around these detectors, and has been adapted for use by other MKID instruments such as TolTEC and OLIMPO.1 We present an overview of these systems as well as in-depth methodology of the ground-based characterization and the measured in-flight performance.
We present the InGaAs detector system of the Wide-Field Infrared Transient Explorer (WINTER), a new infrared instrument operating on a 1 meter robotic telescope at the Palomar Observatory. These commercially produced sensors are cooled to -50 °C by a thermo-electric cooler integrated into a room temperature package. These warm InGaAs sensors represent a dramatic reduction in cost and complexity over HgCdTe systems and achieve sky background-limited performance across our science bands for exposures greater than a few seconds. We present the design and implementation of the WINTER detector system and readout electronics.
The Wide-field Infrared Transient Explorer (WINTER) is a 1x1 degree infrared survey telescope under devel- opment at MIT and Caltech, and slated for commissioning at Palomar Observatory in 2021. WINTER is a seeing-limited infrared time-domain survey and has two main science goals: (1) the discovery of IR kilonovae and r-process materials from binary neutron star mergers and (2) the study of general IR transients, including supernovae, tidal disruption events, and transiting exoplanets around low mass stars. We plan to meet these science goals with technologies that are relatively new to astrophysical research: hybridized InGaAs sensors as an alternative to traditional, but expensive, HgCdTe arrays and an IR-optimized 1-meter COTS telescope. To mitigate risk, optimize development efforts, and ensure that WINTER meets its science objectives, we use model-based systems engineering (MBSE) techniques commonly featured in aerospace engineering projects. Even as ground-based instrumentation projects grow in complexity, they do not often have the budget for a full-time systems engineer. We present one example of systems engineering for the ground-based WINTER project, featuring software tools that allow students or staff to learn the fundamentals of MBSE and capture the results in a formalized software interface. We focus on the top-level science requirements with a detailed example of how the goal of detecting kilonovae flows down to WINTER’s optical design. In particular, we discuss new methods for tolerance simulations, eliminating stray light, and maximizing image quality of a fly’s-eye design that slices the telescope’s focus onto 6 non-buttable, IR detectors. We also include a discussion of safety constraints for a robotic telescope.
The Next Generation Balloon-Borne Large Aperture Submillimeter Telescope (BLAST-TNG) was a unique instrument for characterizing the polarized submillimeter sky at high-angular resolution. BLAST-TNG flew from the Long Duration Balloon Facility in Antarctica in January 2020. Despite the short flight duration, the instrument worked very well and is providing significant information about each subsystem that will be invaluable for future balloon missions. In this contribution, we discuss the performance of telescope and gondola.
The Wide-Field Infrared Transient Explorer (WINTER) is a new infrared time-domain survey instrument on a dedicated 1 meter robotic telescope at the Palomar Observatory. WINTER will perform the first seeing-limited time domain survey of the infrared (IR) sky, with a particular emphasis on identifying r-process material in binary neutron star (BNS) merger remnants detected by LIGO. We have developed and tested a custom opto-mechanical mounting scheme for a 6-channel tiled optical system with <90% fill factor. Here, we present the mechanical design and testing approach used in the development of WINTER.
The Large Lenslet Array Magellan Spectrograph (LLAMAS) is an NSF-funded facility-class Integral Field Unit (IFU) spectrograph under construction for the 6.5-meter Magellan Telescopes. It covers a 37" x 37" solid angle with 2,400 optical fibers efficiently coupled by a double-sided microlens-array, producing R = 2, 000 spectra with 0.7511 spatial resolution. Its broad passband from λ = 350 970nm offers access to line and continuum measurements over a wide range in redshift. Light is multiplexed by the IFU into 8 compact, carbon-fiber bench mounted spectrographs utilizing VPH grisms. We employed several trades on cost-performance ratio while optimizing LLAMAS’ system design including: (a) Splitting the passband between 3 fast all-refractive camera systems with modest entrance pupils, (b) limiting the fibers per unit (i.e. slit length) and building more spectrographs to leverage on production volume, and (c) using a commercial CCD camera built around a common detector (e2v 42-40) and thermoelectric + liquid cooling. To boost blue throughput and achieve high-quality sky subtraction the spectrograph cluster is mounted next to the focal plane on a folded Cassegrain port with gravity-invariant support. This also allows the instrument to deploy quickly, and be fully accessible within 10 minutes on any night, serving as a facility unit for observing astrophysical transients. A sub-sized IFU (169 fibers), mounted in a full-sized front end package with a single spectrograph (2 cameras) was delivered to Magellan in March 2020. We present as-measured laboratory performance from this prototype, though on-sky commissioning was unfortunately cancelled because of the COVID-19 pandemic. This contribution therefore focuses on subsequent design evolution and status of the full facility instrument.
The Next Generation Balloon-borne Large Aperture Submillimeter Telescope (BLAST-TNG) is a submillimeter mapping experiment planned for a 28 day long-duration balloon (LDB) flight from McMurdo Station, Antarctica during the 2018-2019 season. BLAST-TNG will detect submillimeter polarized interstellar dust emission, tracing magnetic fields in galactic molecular clouds. BLAST-TNG will be the first polarimeter with the sensitivity and resolution to probe the ~0.1 parsec-scale features that are critical to understanding the origin of structures in the interstellar medium.
BLAST-TNG features three detector arrays operating at wavelengths of 250, 350, and 500 m (1200, 857, and 600 GHz) comprised of 918, 469, and 272 dual-polarization pixels, respectively. Each pixel is made up of two crossed microwave kinetic inductance detectors (MKIDs). These arrays are cooled to 275 mK in a cryogenic receiver. Each MKID has a different resonant frequency, allowing hundreds of resonators to be read out on a single transmission line. This inherent ability to be frequency-domain multiplexed simplifies the cryogenic readout hardware, but requires careful optical testing to map out the physical location of each resonator on the focal plane. Receiver-level optical testing was carried out using both a cryogenic source mounted to a movable xy-stage with a shutter, and a beam-filling, heated blackbody source able to provide a 10-50 C temperature chop. The focal plane array noise properties, responsivity, polarization efficiency, instrumental polarization were measured. We present the preflight characterization of the BLAST-TNG cryogenic system and array-level optical testing of the MKID detector arrays in the flight receiver.
The Next Generation Balloon-borne Large Aperture Submillimeter Telescope (BLAST-TNG) is a submillimeter mapping experiment planned for a 28 day long-duration balloon (LDB) flight from McMurdo Station, Antarctica during the 2018-2019 season. BLAST-TNG will detect submillimeter polarized interstellar dust emission, tracing magnetic fields in galactic molecular clouds. BLAST-TNG will be the first polarimeter with the sensitivity and resolution to probe the ∼0.1 parsec-scale features that are critical to understanding the origin of structures in the interstellar medium. With three detector arrays operating at 250, 350, and 500 μm (1200, 857, and 600 GHz), BLAST-TNG will obtain diffraction-limited resolution at each waveband of 30, 41, and 59 arcseconds respectively. To achieve the submillimeter resolution necessary for its science goals, the BLAST-TNG telescope features a 2.5 m aperture carbon fiber composite primary mirror, one of the largest mirrors flown on a balloon platform. Successful performance of such a large telescope on a balloon-borne platform requires stiff, lightweight optical components and mounting structures. Through a combination of optical metrology and finite element modeling of thermal and mechanical stresses on both the telescope optics and mounting structures, we expect diffractionlimited resolution at all our wavebands. We expect pointing errors due to deformation of the telescope mount to be negligible. We have developed a detailed thermal model of the sun shielding, gondola, and optical components to optimize our observing strategy and increase the stability of the telescope over the flight. We present preflight characterization of the telescope and its platform.
Polarized thermal emission from interstellar dust grains can be used to map magnetic fields in star forming molecular clouds and the diffuse interstellar medium (ISM). The Balloon-borne Large Aperture Submillimeter Telescope for Polarimetry (BLASTPol) flew from Antarctica in 2010 and 2012 and produced degree-scale polarization maps of several nearby molecular clouds with arcminute resolution. The success of BLASTPol has motivated a next-generation instrument, BLAST-TNG, which will use more than 3000 linear polarization- sensitive microwave kinetic inductance detectors (MKIDs) combined with a 2.5 m diameter carbon fiber primary mirror to make diffraction-limited observations at 250, 350, and 500 µm. With 16 times the mapping speed of BLASTPol, sub-arcminute resolution, and a longer flight time, BLAST-TNG will be able to examine nearby molecular clouds and the diffuse galactic dust polarization spectrum in unprecedented detail. The 250 μm detec- tor array has been integrated into the new cryogenic receiver, and is undergoing testing to establish the optical and polarization characteristics of the instrument. BLAST-TNG will demonstrate the effectiveness of kilo-pixel MKID arrays for applications in submillimeter astronomy. BLAST-TNG is scheduled to fly from Antarctica in December 2017 for 28 days and will be the first balloon-borne telescope to offer a quarter of the flight for “shared risk” observing by the community.
The Balloon-borne Large Aperture Submillimeter Telescope for Polarimetry (BLASTPol) is a suborbital mapping experiment designed to study the role magnetic fields play in star formation. BLASTPol has had two science flights from McMurdo Station, Antarctica in 2010 and 2012. These flights have produced thousands of polarization vectors at 250, 350 and 500 microns in several molecular cloud targets. We present the design, specifications, and progress towards the next-generation BLASTPol experiment (BLAST-TNG). BLAST-TNG will fly a 40% larger diameter primary mirror, with almost 8 times the number of polarization-sensitive detectors resulting in a factor of 16 increase in mapping speed. With a spatial resolution of 2200 and four times the field of view (340 arcmin2) of BLASTPol, BLAST-TNG will bridge the angular scales between Planck's all-sky maps with 50 resolution and ALMA's ultra-high resolution narrow (~ 2000) fields. The new receiver has a larger cryogenics volume, allowing for a 28 day hold time. BLAST-TNG employs three arrays of Microwave Kinetic Inductance Detectors (MKIDs) with 30% fractional bandwidth at 250, 350 and 500 microns. In this paper, we will present the new BLAST-TNG instrument and science objectives.
The cosmic microwave background (CMB) provides a powerful tool for testing modern cosmology. In particular, if inflation has occurred, the associated gravitational waves would have imprinted a specific polarized pattern on the CMB. Measurement of this faint polarized signature requires large arrays of polarization-sensitive, background- limited detectors, and an unprecedented control over systematic effects associated with instrument design. To this end, the ground-based Cosmology Large Angular Scale Surveyor (CLASS) employs large-format, feedhorn- coupled, background-limited Transition-Edge Sensor (TES) bolometer arrays operating at 40, 90, and 150 GHz bands. The detector architecture has several enabling technologies. An on-chip symmetric planar orthomode transducer (OMT) is employed that allows for highly symmetric beams and low cross-polarization over a wide bandwidth. Furthermore, the quarter-wave backshort of the OMT is integrated using an innovative indium bump bonding process at the chip level that ensures minimum loss, maximum repeatability and performance uniformity across an array. Care has been taken to reduce stray light and on-chip leakage. In this paper, we report on the architecture and performance of the first prototype detectors for the 40 GHz focal plane.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.