In the Polish brown coal mine Belchatow deformation and stress behaviour are investigated to learn in early stage any reaction of this surface coal mine pit. These values are critical in regard of landslide risks as also important for the most economic excavation geometry.
As already reported in GTMM 2002 conference in Karlsruhe, a standard stress monitoring station has been installed and first results have been reported. An important task is to get confident values not in high-precision but in long-term stability. In cooperation with my Polish colleagues and the BAM (German Federal Institute for Material Testing), Berlin, a new EFPI Stress Monitoring Station has been installed in this coal mine and first experiences and results have been reported.
Geotechnical measurements are producing various data which are used for interpretation and e.g. safety calculation. The reliability of such data is of most importance as every decision on civil engineering action needed is based on this data. Known and also unknown influences changing data are a basic demand for deeper investigation and research. In present time we have limited tools only to minimize perturbing influences. One of these demands-the long-term development of data also called long-term stability-is described in this paper.
The paper describes a sensor head for long-term high-precision measurements of very small deflections of a diaphragm used for pressure gauges. High precision deformation measurement is assured by using a fiber Fabry-Perot interferometer sensor; identification of zero-point changes, and thus, long-term stable measurement is achieved by a specially designed absolute interferometer sensor. Several fiber optic solutions based on fiber Fabry-Perot technique have been investigated to find out a reliable sensor design. The presented sensor design has reached prototype status and allows to measure unambiguously static deformations with high precision. In order to evaluate repeatability and possible changes of zero-point reference if the head has been disconnected, validation of the described pressure gauge has been started. This validation work includes calibration and enables to evaluate possible drift effects, and to identify mechanical or thermal hysteresis. Thus, the highlight in this paper is the observation and measurement of zero-point development over time.
The paper describes a sensor head for long-term high-precision measurements of very small deflections of a diaphragm used for pressure gauges. High precision deformation measurement is assured by using a fiber Fabry-Perot interferometer sensor; identification of zero-point changes, and thus, long-term stable measurement is achieved by a specially designed absolute interferometer sensor. Several fiber optic solutions based on fiber Fabry-Perot technique have been investigated to find out a reliable sensor design. The presented sensor design has reached prototype status and allows to measure unambiguously static deformations with high precision. In order to evaluate repeatability and possible changes of zero-point reference if the head has been disconnected, validation of the described pressure gauge has been started. This validation work includes calibration and enables to evaluate possible drift effects, and to identify mechanical or thermal hysteresis.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.