This will count as one of your downloads.
You will have access to both the presentation and article (if available).
The Silicon Pore Optics (SPO) enables the NewAthena mission, delivering an unprecedented combination of good angular resolution, large effective area and low mass. The SPO technology builds significantly on spin-in from the semiconductor industry and is designed to allow a cost-effective flight optics implementation, compliant with the programmatic requirements of the mission.
The NewAthena X-ray optics is highly modular, consisting of hundreds of compact mirror modules arranged in concentric circles and mounted on a metallic optical bench. All aspects of the optics are being developed in parallel, from the industrial production of the mirror plates, over the highly efficient assembly into mirror modules, to the alignment of the mirror modules and their fixation on the optical bench. Dedicated facilities are being built to measure the performance of the NewAthena X-ray telescope optics, demonstrating their compatibility with the environmental and scientific requirements.
An overview is provided of the activities preparing the implementation of the NewATHENA optics.
The next generation x-ray observatory ATHENA (advanced telescope for high energy astrophysics) requires an optics with unprecedented performance. It is the combination of low mass, large effective area and good angular resolution that is the challenge of the x-ray optics of such a mission. ATHENA is the second large class mission in the science programme of ESA, and is currently in a reformulation process, following a design-to-cost approach to meet the cost limit of an ESA L-class mission.
The silicon pore optics (SPO) is the mission enabler being specifically developed for ATHENA, in a joint effort by industry, research institutions and ESA. All aspects of the optics are being addressed, from the mirror plates and their coatings, over the mirror modules and their assembly into the ATHENA telescope, to the facilities required to build and test the flight optics, demonstrating performance, robustness, and programmatic compliance.
The SPO technology is currently being matured to the level required for the adoption of the ATHENA mission, i.e., the start of the mission implementation phase. The monocrystalline silicon material and pore structure of the SPO provide these optics with excellent thermal and mechanical properties. Benefiting from technology spin-in from the semiconductor industry, the equipment, processes, and materials used to produce the SPO are highly sophisticated and optimised.
The field of X-ray astronomy has been characterized by the development and launch of ever larger observatories with the culmination in the European Space Agency’s XMM-Newton and NASA's Chandra missions which are currently operational. XMM-Newton uses a multi-nested structure to provide modest angular resolution (∼10 arcsec) but large effective area, while Chandra sacrifices effective area to achieve the optical stability necessary to provide sub-arc second resolution. Currently the European Space Agency (ESA) is engaged in studies of the next generation of X-ray space observatories, with the aim of producing telescopes with increased sensitivity and resolution. To achieve these aims several telescopes have been proposed, for example ESA and NASA’s combined International X-ray Observatory (IXO), aimed at spectroscopy, and NASA’s Generation-X. In the field of X-ray astronomy sub 0.2 arcsecond resolution with high efficiency would be very exciting. Such resolution is unlikely to be achieved by anything other than an active system. The benefits of a such a high resolution would be important for a range of astrophysics subjects, for example the potential angular resolution offered by active X-ray optics could provide unprecedented structural imaging detail of the Solar Wind bowshock interaction of comets, planets and similar objects and auroral phenomena throughout the Solar system using an observing platform in low Earth orbit.
A major aim of the SXO project was to investigate the production of thin actively controlled grazing incident optics for the next generation of X-ray space telescopes. Currently telescope systems are limited in the resolution and sensitivity by the optical quality of the thin shell optics used. As part of its research programme an actively controlled prototype X-ray thin shell telescope optic of dimensions 30x10cm has been developed to bench test the technology. The design is based on thin nickel shells bonded to shaped piezo-electric unimorph actuators made from lead zirconate titanate (PZT).
View contact details
No SPIE Account? Create one
