Three different techniques for washing bare aluminum-coated telescope optics are studied by analyzing specular and diffuse reflectance data from two 4-meter class telescopes. The established “contact” wash method involves dabbing the mirror’s first surface with natural sponges and detergent, which subjects the coating to some level of abrasion. While this method proves effective at removing contaminants, it is more labor intensive, increases risk to the optics, and induces contact of the first surface. The industry established CO2 “snow” wash to clean the optics at an increased regular interval. This method utilizes thermal properties and pressure to clean the first surface, and is well documented throughout the industry. An alternate “contactless” approach has been recently employed utilizing only pressurized water to mechanically agitate contaminants. This reduces the amount of labor and the risk to the optics, although the effectiveness of this method is yet to be determined. A comparison of these three wash methods is presented using long-term specular and diffuse reflectance data from two 4-meter class telescopes. Data taken from multiple telescopes offers the opportunity to gain generalized insights into each wash method’s performance. Despite challenges of comparing data from different mirrors, coatings, and environments, we attempt to establish trends of their relative results independent of the unique degradation profile of each mirror and coating.
The Dark Energy Spectroscopic Instrument (DESI) is a Stage IV ground-based dark energy experiment that will measure the expansion history of the Universe using the Baryon Acoustic Oscillation technique. The spectra of 35 million galaxies and quasars over 14000 square degrees will be measured during the life of the experiment. We describe the installation of the major elements of the instrument at the Mayall 4m telescope, completed in late 2019. The previous prime focus corrector, spider vanes, and upper rings were removed from the Mayall’s Serrurier truss and replaced with the newlyconstructed DESI ring, vanes, cage, hexapod, and optical corrector. The new corrector was optically aligned with the primary mirror using a laser tracker system. The DESI focal plane system was integrated to the corrector, with each of its ten 500-fiber-positioner petal segments installed using custom installation hardware and the laser tracker. Ten DESI spectrographs with 30 cryostats were installed in a newly assembled clean room in the Large Coude Room. The ten cables carrying 5000 optical fibers from the positioners in the focal plane were routed down the telescope through cable wraps at the declination and hour angle axes, and their integral slitheads were integrated with the ten spectrographs. The fiber view camera assembly was installed to the Mayall’s primary mirror cell. Servers for the instrument control system replaced existing computer equipment. The fully integrated instrument has been commissioned and is ready to start its operations phase.
We report on the upgraded One Degree Imager (ODI) at the WIYN 3.5 meter telescope at the Kitt Peak Observatory after the focal plane was expanded by an additional seventeen detectors in spring 2015. The now thirty Orthogonal Transfer Array CCD detectors provide a total field of view of 40’ x 48’ on the sky. The newly added detectors underwent a design revision to mitigate reduced charge transfer efficiency under low light conditions. We discuss the performance of the focal plane and challenges in the photometric calibration of the wide field of view, helped by the addition of telescope baffles. In a parallel project, we upgraded the instrument’s three filter arm mechanisms, where a degrading worm-gear mechanism was replaced by a chain drive that is operating faster and with high reliability. Three more filters, a u’ band and two narrow band filters were added to the instrument’s complement, with two additional narrow band filters currently in procurement (including an Hα filter). We review the lessons learned during nearly three years of operating the instrument in the observatory environment and discuss infrastructure upgrades that were driven by ODI’s needs.
The Dark Energy Spectroscopic Instrument (DESI) is under construction and will be used to measure the expansion history of the Universe using the Baryon Acoustic Oscillation (BAO) technique and the growth of structure using redshift-space distortions (RSD). The spectra of 30 million galaxies over 14000 sq deg will be measured over the course of the experiment. In order to provide spectroscopic targets for the DESI survey, we are carrying out a three-band (g,r,z ) imaging survey of the sky using the NOAO 4-m telescopes at Kitt Peak National Observatory (KPNO) and the Cerro Tololo Interamerican Observatory (CTIO). At KPNO, we will use an upgraded version of the Mayall 4m telescope prime focus camera, Mosaic3, to carry out a z-band survey of the Northern Galactic Cap at declinations δ≥+30 degrees. By equipping an existing Dewar with four 4kx4k fully depleted CCDs manufactured by the Lawrence Berkeley National Laboratory (LBNL), we increased the z-band throughput of the system by a factor of 1.6. These devices have the thickest active area fielded at a telescope. The Mosaic3 z-band survey will be complemented by g-band and r-band observations using the Bok telescope and 90 Prime imager on Kitt Peak. We describe the upgrade and performance of the Mosaic3 instrument and the scope of the northern survey.
KEYWORDS: Servomechanisms, Optical instrument design, Control systems, Telescopes, Control systems design, Computer programming, Space telescopes, Mirrors, Observatories
Motivated by a desire to improve the KPNO Mayall 4m telescope’s pointing and tracking performance prior to the start of the DESI installation and by a need to improve the maintainability of its telescope control system (TCS), we recently completed a major modernization of that system based heavily on recent changes made at the CTIO Blanco 4m, as described by Warner et al (2012). We describe here the things we did differently from the Blanco upgrade. We also present results from the as-built performance of the new servo and pointing systems.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.