It is well known that zone plates can print extremely small features in microlithography. However, the size and complexity of zone plates has limited their application. In this paper simulated and experimental results are presented for simple zone plates with very high performance. It has previously been shown that submicron diameter zone plates, with only 2 or 3 zones, can focus 1 nm wavelength X-rays to less than 40 nm FWHM. A zone plate with two zones is a ring, whose ratio of outer radius to inner radius is about 0.7. This implies dimensions that may be too small for easy control. However, simulations have demonstrated excellent focusing for both clear and opaque rings over a ratio of radii of at least 0.6 to 0.8. For high contrast, 1 nm wavelength zone plates are typically fabricated in 200-300 nm thick gold. This leads to high aspect ratios, which are difficult to pattern. However simulations have shown excellent focusing in much thinner gold. In addition, conditions were found in 30nm to 90 nm thick gold which generate narrow dark "foci." The focusing of linear zone plates was also simulated. Linear zone plates with 3 and 5 zones produced excellent line foci, although linear zone plates with 2 and 4 zones were much poorer. Scaled up experiments in visible light supported both the circular and linear simulation results.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.