The GeSn alloy with Sn composition of 11% has been grown using an industry standard reduced-pressure chemical vapor deposition reactor in a single run epitaxy. Low-cost commercially available GeH4 and SnCl4 were used as Ge and Sn precursors, respectively. The material characterization showed that the threading dislocations were trapped in the Ge/GeSn interface and do not propagate to the GeSn layer, resulting in high quality material. The temperature-dependent photoluminescence study revealed that the direct bandgap GeSn alloy was achieved, as the emission intensity significantly increased at low temperature. The sample was than fabricated into photoconductive detectors and waveguide lasers. For the photodetector, the spectral response wavelength cutoff at 3.0 μm was observed. The specific detectivity of 3.5×1010 cm•Hz1/2W-1 was achieved, which is close to that of market dominating InGaAs photodetectors that are operating in the same wavelength range; For the waveguide laser, the lasing threshold pumping power density of 86.5 kW/cm2 at 10 K and the highest operating temperature of 110 K were obtained. Furthermore, the characteristic temperature was evaluated as 65 K.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.