Simulations and experiments have been carried out to explore using a plastic scintillator as a dosimetry probe in the
vicinity of a pulsed bremsstrahlung source in the range 4 to 20 MeV. Taking advantage of the tissue-equivalent
properties of this detector in conjunction with the use of a fast digital signal processor near real-time dosimetry was
shown to be possible. The importance of accounting for a broad energy electron beam in bremsstrahlung production,
and photon scattering and build-up, in correctly interpreting dosimetry results at long stand-off distances is highlighted
by comparing real world experiments with ideal geometry simulations. Close agreement was found between absorbed
energy calculations based upon spectroscopic techniques and calculations based upon signal integration, showing a ratio
between 10 MeV absorbed dose to 12 MeV absorbed dose of 0.58 at a distance of 91.4 m from the accelerator. This is
compared with an idealized model simulation with a monoenergetic electron beam and without scattering, where the
ratio was 0.46.
Current requirements of some Homeland Security active interrogation projects for the detection of Special Nuclear Material
(SNM) necessitate the development of faster inspection and acquisition capabilities. In order to do so, fast detectors which
can operate during and shortly after intense interrogation radiation flashes are being developed. Novel silicon carbide (SiC)
semiconductor Schottky diodes have been utilized as robust neutron and photon detectors in both pulsed photon and pulsed
neutron fields and are being integrated into active inspection environments to allow exploitation of both prompt and delayed
emissions. These detectors have demonstrated the capability of detecting both photon and neutron events during intense
photon flashes typical of an active inspection environment. Beyond the inherent insensitivity of SiC to gamma radiation,
fast digitization and processing has demonstrated that pulse shape discrimination (PSD) in combination with amplitude
discrimination can further suppress unwanted gamma signals and extract fast neutron signatures. Usable neutron signals
have been extracted from mixed radiation fields where the background has exceeded the signals of interest by >1000:1.
KEYWORDS: Acoustics, Cameras, Land mines, Ultrasonics, Gallium arsenide, Holography, Video, Vibration isolation, Signal attenuation, Signal to noise ratio
There is considerable interest in detecting objects such as landmines shallowly buried in loose earth or sand. Various techniques involving microwave, acoustic, thermal and magnetic sensors have been used to detect such objects. Acoustic and microwave sensors have shown promise, especially if used together. In most cases, the sensor package is scanned over an area to eventually build up an image or map of anomalies. We are proposing an alternate, acoustic method that directly provides an image of acoustic waves in sand or soil, and their interaction with buried objects. The INEEL Laser Ultrasonic Camera utilizes dynamic holography within photorefractive recording materials. This permits one to image and demodulate acoustic waves on surfaces in real time, without scanning. A video image is produced where intensity is directly and linearly proportional to surface motion. Both specular and diffusely reflecting surfaces can be accommodated and surface motion as small as 0.1 nm can be quantitatively detected. This system was used to directly image acoustic surface waves in sand as well as in solid objects. Waves at frequencies of 16 kHz were generated using modified acoustic speakers. These waves were directed through sand toward partially buried objects. The sand container was not on a vibration isolation table, but sat on the lab floor. Interaction of wavefronts with buried objects showed reflection, diffraction and interference effects that could provide clues to location and characteristics of buried objects. Although results are preliminary, success in this effort suggests that this method could be applied to detection of buried landmines or other near-surface items such as pipes and tanks.
The INEEL has developed a photorefractive ultrasonic imaging technology that records both phase and amplitude of ultrasonic waves on the surface of solids. Phase locked dynamic holography provides full field images of these waves scattered from subsurface defects in solids, and these data are compared with theoretical predictions. Laser light reflected by a vibrating surface is imaged into a photorefractive material where it is mixed in a heterodyne technique with a reference wave. This demodulates the data and provides an image of the ultrasonic waves in either 2 wave or 4 wave mixing mode. These data images are recorded at video frame rates and show phase locked traveling or resonant acoustic waves. This technique can be used over a broad range of ultrasonic frequencies. Acoustic frequencies from 2 kHz to 10 MHz have been imaged, and a point measuring (non-imaging) version of the system has measured picometer amplitudes at 1 Ghz.
A new approach to the measurement of ultrasonic vibrations has been developed at the INEEL. This system utilizes heterodyne interferometric detection in a photorefractive material to provide real time, full field images of ultrasonic vibration amplitude and phase without scanning. The INEEL Laser Ultrasonic Camera has linear response for ultrasonic displacement (xi) < (lambda) divided by 4(pi) , approximately 45 nm displacement at a laser wavelength of 532 nm. In addition, the system exhibits flat response and narrow band detection for a broad range of vibration frequencies. The system is very robust, and has the potential for operation even in noisy industrial settings. A description of the system, representative data and several potential applications will be presented.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.