Fiber lasers are a great source for tunable lasers due to the wide and relatively flat gain spectra of rare earth transitions in a glassy host (as compared to crystals). Thulium (Tm)-doped fibers, in particular, offer an extremely wide tunability of up to 330 nm in the 2μm wavelength region in a dual gain module configuration1. More recently, new concepts have emerged, which allow the synchronized emission of two or even more wavelengths2. These sources are particularly useful for nonlinear frequency conversion via four-wave mixing (FWM) or difference frequency generation (DFG). We will present a very versatile fiber-integrated approach based on Fiber-Bragg-Grating (FBG) arrays implemented in a theta-shaped cavity. The Tm-doped fiber source emits typical average powers of 0.5W and is tunable from 1931nm to 2040nm. The emission linewidth follows the spectral characteristic of the FBG and is typically 30GHz in our case. This concept allows a constant wavelength-independent repetition rate as well as a synchronous emission of two or even three independently tunable wavelengths. The tuning is performed purely electronically by optical gating, and in addition the pulse duration can be tuned between 4ns and 25ns. The switching speed is very fast and was measured to be less than 10μs. These experiments will be contrasted with a different approach based on a VLMA fiber associated to a set of two volume Bragg gratings (VBG), one of them being angle-tunable. This concept allows pulsed (Q-switched) as well as CW operation and features a continuous and wider tunability of up to 144nm especially and also the dual wavelength mode. The output power was > 4.5W in CW mode and pulse peak power of 12kW have been obtained in the Q-switched mode with pulse durations of 25ns.
Based on favorable properties with respect to beam quality, efficiency and applicability, fiber-integrated lasers replace costly bulk lasers in various application fields, such as in academia, industry, medical technology and life sciences. Additionally, rare-earth doped fibers exhibit broad gain regions, providing huge potential to develop broadly tunable fiber lasers for spectroscopy. Recently a fiber-integrated tuning concept based on an FBG array as discrete spectral filter was demonstrated, exhibiting a unique flexibility to tailor spectral and temporal emission properties. In this work, we present the prospects of this concept to address Differential Absorption LIDAR (DIAL) for environmental sensing. With tunable multi-wavelength operation for enhanced measurement speeds, and customized spectral emission lines to probe specific molecules, it may provide a fast and cost-efficient solution with excellent usability.
Fiber lasers provide the perfect basis to develop broadly tunable lasers with high efficiency, excellent beam quality and user-friendly operation as they are increasingly demanded by applications in biophotonics and spectroscopy. Recently, a novel tuning scheme has been presented using fiber Bragg grating (FBG) arrays as fiber-integrated spectral filters containing many standard FBGs with different feedback wavelengths. Based on the discrete spectral sampling, these reflective filters uniquely enable tailored tuning ranges and broad bandwidths to be implemented into fiber lasers. Even though the first implementation of FBG arrays in pulsed tunable lasers based on a sigma ring resonators works with good emission properties, the laser wavelength is tuned by a changing repetition rate, which causes problems with applications in synchronized environments.
In this work, we present a modified resonator scheme to maintain a constant repetition rate over the tuning range and still benefit from the advantages of FBG arrays as filters. With a theta ring cavity and two counter propagating filter passes, the distributed feedback of the FBG array is compensated resulting in a constant pulse round trip time for each filter wavelength. Together with an adapted gating scheme controlling the emission wavelength with a modulator, the tuning principle has been realized based on a Ytterbium-doped fiber laser. We present first experimental results demonstrating a tuning range of 25nm, high signal contrast and pulse durations of about 10ns. With the prospect of tailored tuning ranges, this pulsed fiber-integrated laser may be the basis to tackle challenging applications in spectroscopy.
Thulium (Tm)-doped fiber lasers offer a broad emission bandwidth in the 2-μm region, providing the perfect basis to develop broadly tunable laser sources, e.g., for spectroscopic applications. Recently, a tuning principle for pulsed fiber lasers has been reported, which is based on a fiber Bragg grating (FBG) array as a discrete spectral filter. This concept uniquely combines an unrivaled spectral freedom for tailored tuning ranges with a monolithic layout preserving the inherent advantages of fiber-integrated systems. In this study, we investigate this discrete tuning method using a Tm-doped fiber laser in the spectral domain around 1950 nm. While the laser emits linearly polarized light based on a polarization-maintaining (PM) resonator, we also examine the possibility of using standard FBG arrays inscribed in non-PM fiber. In order to highlight the prospect for tunable high-power operation, the tunable seed laser is implemented in a master oscillator power amplifier configuration scaling the average power to ∼28 W. With a tuning range of up to 76 nm, the emission characteristics of the system are investigated showing pulse durations down to 11 ns and a very good spectral signal contrast with narrow linewidth.
Over the past years, Thulium (Tm) -doped fiber lasers in the 2μm region have gained a lot of interest due to many potential applications in materials processing and biophotonics. Based on the broad gain regions spanning from 1800nm to 2100nm, they offer the perfect basis to implement broadly tunable and user-friendly light sources like they are increasingly demanded in spectroscopic applications. Recently, a novel tuning mechanism based on a fiber Bragg grating (FBG) array as versatile spectral filter has been reported. This concept combines unique spectral freedom for customized tuning ranges and ultrabroad bandwidths with a fiber-integrated setup in order to maintain the advantages of the waveguide geometry. In this work, we demonstrate such a dispersion tuned and pulsed fiber laser in the Tm domain around 1950nm using a modulator and a discrete FBG array to control the emission wavelength. In order to comply with the demands of potential applications in biophotonics, for the first time, this tuning concept is realized in a polarization maintaining (PM) configuration ensuring linearly polarized output. While a simple FBG array is employed containing five gratings inscribed in PM fiber, we also outline the prospect to implement FBGs fabricated in a standard single mode fiber. The emission characteristics of the system are investigated showing pulse durations down to 11ns and a good spectral signal contrast. In order to highlight the prospect for tunable high-power operation, we have also implemented an amplification stage scaling the average power to more than 25W.
An ytterbium-doped fiber laser mode-locked by the interaction of a fiber Bragg grating and longitudinal acoustic waves in a suspended core fiber is experimentally investigated. An optimized design of an acousto-optic modulator is also proposed. The results indicate output pulses with a width of less than 550 ps at a repetition rate of 10 MHz. The reduction of the power consumed by the transducer and the grating length points out to more efficient, compact and fast acousto-optic modulators for mode-locked all-fiber lasers.
Fiber lasers provide the foundation to combine an excellent beam quality in single mode operation with a robust and highly efficient design. Based on fiber-integrated configurations, they are employed in many different applications ranging from industry over research to medical technology. However, there is lots of potential to approach even new fields of applications e.g. in spectroscopy based on tunable systems with an adjustable emission wavelength. We present a novel tuning concept for pulsed fiber-integrated laser systems using an array of fiber Bragg gratings (FBGs) as discrete spectral filter. Based on stacking many standard FBGs, the bandwidth and filter properties are easy to scale by increasing the number of gratings allowing huge tuning ranges as well as tailored tuning characteristics. In this work, we demonstrate the potential of this electrically controlled tuning concept. Using an Ytterbium (Yb)-doped fiber laser, we investigate the general tuning characteristics. With variable pulse durations in the nanosecond regime, we demonstrate high signal contrast (~45 dB), excellent wavelength stability and narrow linewidth (<15 GHz). In order to highlight the great spectral freedom, a tuning range of 74 nm in the Yb band is realized which, to the best of our knowledge, is the largest bandwidth reported based on a monolithic filter design.
We have investigated the possibility to use a step-chirped fiber Bragg grating array for a time-delay-spectrometer. This concept allows a simultaneous spectral and temporal characterization of pulsed light in the nanosecond regime which can also be applied for the investigation of single pulses. A spectral resolution in the 100 picometer range has been achieved and used for the characterization of laser pulses in the nanosecond range.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.