For ESA’s EnVision Mission to Venus, a consortium of three spectrometers from across Europe has been formed to collaborate not only on the management and science aspects, but also on the technical implementation. One important technical goal of the VenSpec suite is to implement a clean, simple and robust interface to the spacecraft and to provide an abstraction layer between the channels and the spacecraft. This is achieved by implementing the Central Control Unit (CCU), which provides a harmonized power and data interface to the spacecraft and allows the channels to design for a simple tailored internal interface to the CCU. The CCU consists of two electrical subsystems, the Data Handling Unit (CCU DHU), developed by the Max Planck Institute for Solar System Research (MPS) in Göttingen and the Institute of Computer and Network Engineering (IDA) in Braunschweig and the Power Supply Unit (CCU PSU), developed by the Instituto de Astrofísica de Andalucía (IAA-CSIC) in Granada, the system responsibility being at the DLR Institute of Planetary Research (DLR-PF) in Berlin. Within this framework, an extended electrical architecture trade-off was performed in 2023 to optimize the system, guaranteeing the requested functionality and complying to requirements from all sides. As a result of the trade-off. a single power and data interface were found to be the most suitable and robust solution considering performance, reliability, Fault Detection Isolation and Recovery (FDIR) and Electromagnetic Compatibility (EMC) considerations as well as the complexity of the associated verification campaign. This paper demonstrates the options that were suggested by the different parties and justifies the final architecture, which has been chosen to achieve the best solution for the VenSpec suite.
The first generation of ELT instruments includes an optical-infrared high resolution spectrograph, indicated as ELT-HIRES and recently christened ANDES (ArmazoNes high Dispersion Echelle Spectrograph). ANDES consists of three fibre-fed spectrographs ([U]BV, RIZ, YJH) providing a spectral resolution of ∼100,000 with a minimum simultaneous wavelength coverage of 0.4-1.8 μm with the goal of extending it to 0.35-2.4 μm with the addition of an U arm to the BV spectrograph and a separate K band spectrograph. It operates both in seeing- and diffraction-limited conditions and the fibre-feeding allows several, interchangeable observing modes including a single conjugated adaptive optics module and a small diffraction-limited integral field unit in the NIR. Modularity and fibre-feeding allows ANDES to be placed partly on the ELT Nasmyth platform and partly in the Coudé room. ANDES has a wide range of groundbreaking science cases spanning nearly all areas of research in astrophysics and even fundamental physics. Among the top science cases there are the detection of biosignatures from exoplanet atmospheres, finding the fingerprints of the first generation of stars, tests on the stability of Nature’s fundamental couplings, and the direct detection of the cosmic acceleration. The ANDES project is carried forward by a large international consortium, composed of 35 Institutes from 13 countries, forming a team of almost 300 scientists and engineers which include the majority of the scientific and technical expertise in the field that can be found in ESO member states.
The first generation of ELT instruments includes an optical-infrared high resolution spectrograph, indicated as ELT-HIRES and recently christened ANDES (ArmazoNes high Dispersion Echelle Spectrograph). ANDES consists of three fibre-fed spectrographs (UBV, RIZ, YJH) providing a spectral resolution of ∼100,000 with a minimum simultaneous wavelength coverage of 0.4-1.8 µm with the goal of extending it to 0.35-2.4 µm with the addition of a K band spectrograph. It operates both in seeing- and diffraction-limited conditions and the fibre-feeding allows several, interchangeable observing modes including a single conjugated adaptive optics module and a small diffraction-limited integral field unit in the NIR. Its modularity will ensure that ANDES can be placed entirely on the ELT Nasmyth platform, if enough mass and volume is available, or partly in the Coudé room. ANDES has a wide range of groundbreaking science cases spanning nearly all areas of research in astrophysics and even fundamental physics. Among the top science cases there are the detection of biosignatures from exoplanet atmospheres, finding the fingerprints of the first generation of stars, tests on the stability of Nature’s fundamental couplings, and the direct detection of the cosmic acceleration. The ANDES project is carried forward by a large international consortium, composed of 35 Institutes from 13 countries, forming a team of more than 200 scientists and engineers which represent the majority of the scientific and technical expertise in the field among ESO member states.
We present the results from the phase A study of ELT-HIRES, an optical-infrared High Resolution Spectrograph for ELT, which has just been completed by a consortium of 30 institutes from 12 countries forming a team of about 200 scientists and engineers. The top science cases of ELT-HIRES will be the detection of life signatures from exoplanet atmospheres, tests on the stability of Nature’s fundamental couplings, the direct detection of the cosmic acceleration. However, the science requirements of these science cases enable many other groundbreaking science cases. The baseline design, which allows to fulfil the top science cases, consists in a modular fiber- fed cross-dispersed echelle spectrograph with two ultra-stable spectral arms providing a simultaneous spectral range of 0.4-1.8 μm at a spectral resolution of ~100,000. The fiber-feeding allows ELT-HIRES to have several, interchangeable observing modes including a SCAO module and a small diffraction-limited IFU.
High resolution spectroscopy has been considered of a primary importance to exploit the main scientific cases foreseen for ESO ELT, the Extremely Large Telescope, the future largest optical-infrared telescope in the world. In this context ESO commissioned a Phase-A feasibility study for the construction of a high resolution spectrograph for the ELT, tentatively named HIRES. The study, which lasted 1.5 years, started on March 2016 and was completed with a review phase held at Garching ESO headquarters with the aim to assess the scientific and technical feasibility of the proposed instrument. One of the main tasks of the study is the architectural design of the software covering all the aspects relevant to control an astronomical instrument: from observation preparation through instrument hardware and detectors control till data reduction and analysis. In this paper we present the outcome of the Phase-A study for the proposed HIRES software design highlighting its peculiarities, critical areas and performance aspects for the whole data flow. The End-toEnd simulator, a tool already capable of simulating HIRES end products and currently being used to drive some design decision, is also shortly described.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.