In this paper, the thermal resistance radiant heat flow sensor and the automatic balance thin film radiant heat flow sensor are calibrated according to the small-scale heat flow in the cold vacuum environment, and the stability time is analyzed, the calibration data is linearly fitted, and then the calibration process is analyzed. The errors that may occur in the It provides a method basis for the engineering use of the heat flow meter in a similar environment.
The solar stray light will seriously affect the imaging quality of the infrared detection system. The traditional point source transmittance (PSF) index is difficult to evaluate the image degradation of the detection system due to stray light. In this paper, a stray light simulation is performed firstly for a given infrared detection system, and the irradiance distribution of solar stray light on the surface of the detector with different incident angles are obtained. Then a simulation model of the detection system is established based on the physical conversion process of the infrared detection system. By combining this simulation model with the light distribution, the spatial noise of the detection system with solar stray light can be calculated quantitatively, and the image degradation due to solar stray light can be quantitatively evaluated.
Blackbody is a crucial device for performance test and radiometric calibration of infrared system. This paper put forward a low-temperature surface blackbody with variable temperature. It works under vacuum and low temperature environment, and can realize the variable temperature control within the range from 130K to 450K by the dual control of liquid nitrogen and electric heating. This paper gave a detailed introduction to the system composition and structure of surface blackbody, introduced the design processes of radiator, temperature controller, temperature control system and other important parts, and analyzed the temperature field distribution of blackbody radiator through finite element software. And test method was used to test performance of the surface blackbody. The results show that the blackbody has good temperature uniformity and temperature stability performance, and is able to provide a benchmark for low temperature test of infrared system.
Aiming at the requirements of low-temperature measurement of spacecraft in thermal vacuum or thermal balance test, on the basis of the principle of infrared thermal measurement, the factors influencing the cool measurement of the infrared system were detailedly calculated and analyzed, from the targeted radiation, background radiation and radiation sensitivity of the detector infrared by the infrared system. It was found that the stray radiation of the optical system was the key link to restrict the cool measurement capability of the current hot test. On this result, a set of infrared thermal imaging system was designed, which could be used directly in the vacuum thermal test environment. In the optical system, the temperature could be cooled into -60°C. The blackbody was used to radiate and calibrate the system. As the experimental result showed, the system could be used to realize the infrared radiation measurement of the 150K cool target, which filled the blank of the technical field in china.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.