A 11.5 J at 40 ns output has been obtained from a diode-pumped cryo-cooled Yb:YAG ceramics active-mirror laser amplifier system. The system consists of two amplifier heads which has four Yb:YAG ceramic disks and two pump LD modules. The Yb:YAG ceramics are cooled by conventional cryostat from rear side and are pumped by LD modules from front-side. A pump pulse is delivered to Yb:YAG ceramics coaxially with a seed pulse to reduce damage risk at a dielectric coating of Yb:YAG ceramics due to simplified coating design. To realize this system design, a LD module has been developed to keep a rectangle pattern with side length of around 37 mm among imaging depth of about 10cm at working distance of about 410 mm. As an experimental result of two pass amplification, a 11.5 J pulse energy was obtained with input energy of 1.0 J and total pump energy of 90.2 J. Then, an optical-to-optical conversion efficiency was 11.6% and an extraction efficiency was estimated to be 42%. In our knowledge, this is the highest output energy with nano second pulse duration in cryo-cooled Yb:YAG active-mirror laser amplification scheme. A repetition rate of 0.05 Hz depends on a limitation of a repetition rate of the seed pulse. A dependence of small-signal-gain on pumping repetition rate of the active-mirror laser head was experimentally evaluated. From the experimental result, we have estimated a feasible repetition rate of over 5 Hz. A 10 Hz operation will be demonstrated to reduce a thermal resistance between Yb:YAG ceramics and cryostat. Finally, this laser amplifier system is installed to a 100-J class laser system as preamplifier.
A high gain cryogenic Yb:YAG ceramics laser amplifier for a high energy laser amplification system has been developed. The laser system consists of a fiber oscillator and two stage LD pumped cryogenic Yb:YAG ceramic amplifiers. The preamplifier stage has a 5-pass laser amplifier head and the main amplifier stage has a 2-pass laser amplifier head, respectively. The preamplifier obtained an average stored energy density of 0.836 J/cc and small-signal gain (SSG) of 60 with 33 J of stored energy. Then about 1 μJ of input energy from the oscillator was amplified to 3.6 J. The main amplifier head had four pumping LD modules which irradiated the Yb:YAG ceramics directly. This original angular pumping scheme ideally increases irradiation intensity and homogenizes irradiation pattern on the Yb:YAG ceramics due to superposition effect of all of the LD modules. A maximum peak power of over 100 kW was generated by one LD module. When the output energy of the LD modules was 450 J, a 20 of SSG at single pass was obtained. Stored energy density was evaluated to 0.429 J/cc when 148 J energy was stored in 346 cc of Yb:YAG ceramics. As a result, a 55-J output energy with 10 ns pulse duration was demonstrated at a pumping energy of 450 J. The optical-tooptical conversion efficiency which includes transmissivity of the LD modules was 12 %. The extraction efficiency was estimated to 37%.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.