The phonological network multi-spectral camera has a complicated internal structure. The camera is a composed of eight lenses, and the light path is divided into eight channels. There is a lot of stray light.So deep stray light analysis and suppression design must be performed to reduce the influence of stray light. This paper analyzes the characteristics of phenological network multi-spectral camera system. Two different baffles are designed, and a regional calculation method is proposed to detect the shading performance of the baffle.Then, the stray light analysis was performed on each channel of the phenological network multispectral camera with TracePro. According to the analysis results, PST curves under different conditions are compared, and the appropriate baffle is selected. Finally, shading performance of the baffle was verified through experiments.
Full-disc vector magnetograph (FMG) is one of the main loads in the Advanced Space-based Solar Observatory. FMG is used to realize scientific goals of observing full-disk vector magnetic field with center wavelength of 532.4 nm. The optical system of FMG consists of polarized optical system and imaging optical system, and the imaging optical system composes of the front window and telescope system. The front window has the capability for providing proper situation for scientific observation by absorbing high energy of solar irradiance coming from space while reflecting wavelength of non-scientific investigation beyond wavelength of 532.4±5 nm. The study analyzed the influence of complex space environment on optical glasses. As a result, the material of fused silica, while two pieces of flat glass parallel with 3mm separation structure and thickness of 15mm are determined. Finally, the results show that design for the front window meet the required specifications.
Synthetic aperture lidar is a new ultra-high resolution optical imaging instrument, but its reception field is very narrow which is subject to the "antenna theory". In this paper, the antenna efficiency theory is used to explain the antenna theory and the method of enlarging the field of view of the synthetic aperture laser radar. Then the increase range of the field angle of the three methods is deduced by heterodyne efficiency simulation. The simulation results show that the focal plane heterodyne detection optical path of the wide-beam local oscillator beam focal plane has the ability to improve the heterodyne efficiency of the edge field of view by reducing the heterodyne efficiency of the central field of view. The focal plane heterodyne detection optical path of the array detector requires the detector whose pixel size less than 3 times Airy spot radius covers the whole field of view, which can increase the maximum 1.83N times compared to the antenna theory. The effective field of the pupil plane heterodyne detection optical path of the array detector has nothing to do with the magnification of the telescope, the pupil diameter, the size of the detector, etc., which can be increased by N times as compared with the antenna theory.
The thermal stability of optical antennas is a key parameter determining the performance of satellite optical communication links. The effects of uniform temperature changes on the performance of a Cassegrain optical antenna are discussed. In addition, a simple theoretical model is proposed to describe the defocusing distance and wavefront aberration (power) as a function of temperature. Through the theoretical model, the thermal stability can be quickly assessed in the optical design stage. The alignment data and thermal experimental results are consistent with the theoretical model.
The use of line-plane-switching infrared fiber bundle to achieve wide field of view push-broom infrared imaging has been studied with experiment. In this technology, the linear array end of the imaging fiber bundle is used as a long-linear array infrared detector, and the plane array end of the bundle is coupled by a mature small scale Infrared Focal Plane Array (IRFPA). It can evade the difficulty of getting the long-linear array infrared detector directly, and has a signally significance to the development of internal infrared imaging technology. Based on the introduction of the composition, working principle of this novel infrared optical system, the system principle-demonstrating experiment has been accomplished. The line-plane-switching fiber bundle used in this experiment is 64×9 format plane array and 192×3 format linear array. It is made from chalcogenide glass fibers, possessing core (As40S59.5Se0.5) of 45 μm, cladding (As40S60) of 5 μm, and error of 1% in diameter. Perfect imaging results prove that this novel technology is feasibility and superiority. The analysis of the experiment makes a foundation for the subsequent further verification experiments.
A new subminiature endoscope which used for reconnaissance and diagnosis has been designed. This subminiature endoscope is designed based on imaging fiber bundle and consist of the front object lens whose aperture is only 0.5mm, imaging fiber bundle and the post coupling lens. It realized by using subminiature optical systems . The FOV(field of view) and the focal length of the front object lens are 50° and 0.59mm. And the object distance, F number and detected imaging high of the front object lens are 3mm, 6 and 0.5mm. The total number of the imaging fiber bundle are 10000 and it’s pixel cell size is 5 μm. The effective aperture of the imaging fiber bundle is 0.46mm. The post coupling lens has a reduction ratio of 1.73. It’s object distance and imaging height are 5mm and 0.8mm. The Numerical Aperture (NA) of the front object lens, imaging fiber bundle and the post coupling lens are matching will. The coupling efficiency of the imaging fiber bundle is above 93% and the system’s design result can meet the need of the limit resolution of the imaging fiber. This kind of the fiber endoscope has the peculiarity of wide FOV, fine imaging quality, compact configuration, low finished cost and etc. It is meaningful to realize the objective of miniaturization, batch-type production and high imaging quality of the endoscope.
Relay lens is an important element for infrared system coupled with imaging fiber bundle. According to the basic composition and structural characteristics of infrared system coupled with imaging fiber bundle, this paper put forward the general principle and method of its relay lens design, then a material relay lens has been designed by ZEMAX with definite performance index. It has a working spectral coverage from 3.7μm to 4.8μm, focal length of 33.5mm, magnification of -0.6, linear field of view of 12mm, objective numerical aperture of 0.15. It is objective telecentric and is adapted to the relay of infrared detector and imaging fiber bundle. The total lens has two aspheric surfaces and only four pieces of singlet. Its MTF value is 0.7@17 lp/mm, and distortion is -0.19%. After necessary tolerance analysis and structural design, this relay lens has been fabricated. The optical performances fulfill the design requirements and clear images have been got by this lens. These prove the validity and rationality of the design method. It gives a foundational guidance for such relay lens design.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.