MEMS directional acoustic sensor for locating sound sources

Gamani Karunasiri; Fabio Alves; William Swan

doi:10.1117/12.2244387

3 February 2017 MEMS directional acoustic sensor for locating sound sources

Gamani Karunasiri, Fabio Alves, William Swan

Proceedings Volume 10036, Fourth Conference on Sensors, MEMS, and Electro-Optic Systems; 100361A (2017) https://doi.org/10.1117/12.2244387
Event: Fourth Conference on Sensors, MEMS and Electro-Optic Systems, 2016, Skukuza, Kruger National Park, South Africa

Abstract

The conventional directional sound sensing systems employ an array of spatially separated microphones to achieve directional sensing. However, there are insects such as Ormia ochracea fly that can determine the direction of sound using a miniature hearing organ much smaller than the wavelength of sound it detects. The MEMS based sensors mimicking the fly’s hearing system was fabricated using SOI substrate with 25 micrometer device layer. The sensor was designed to operate around 1.7 kHz, consists of two 1.2 mm × 1.2 mm wings connected in the middle by a 3 mm × 30 micrometer bridge. The entire structure is connected to the substrate by two torsional legs at the center. The sensor operates at its bending resonance frequency and has cosine directional characteristics similar to that of a pressure gradient microphone. For unambiguously determining the direction of sound, two sensors were assembled with a canted angle and outputs of the two sensors were processed to uniquely locate the bearing. At the bending resonant frequency (1.7 kHz) an output voltage of about 25 V/Pa was measured. The uncertainty of the bearing of sound ranged from less than 0.3 degrees close to the normal axis (0 degree) to 3 degrees at the limits of coverage (± 60 degrees) based on the 30 degree canted angle used. These findings indicate the potential use of a dual MEMS direction finding sensor assembly to locate sound sources with high accuracy.

Citation Download Citation

Gamani Karunasiri, Fabio Alves, and William Swan "MEMS directional acoustic sensor for locating sound sources", Proc. SPIE 10036, Fourth Conference on Sensors, MEMS, and Electro-Optic Systems, 100361A (3 February 2017); https://doi.org/10.1117/12.2244387

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available