Paper
21 March 1989 On A Few Functions Of HIPOSS (High Precision Optical Surface Sensor) And Their Applications
Tsuguo Kohno
Author Affiliations +
Proceedings Volume 1009, Surface Measurement and Characterization; (1989) https://doi.org/10.1117/12.949150
Event: 1988 International Congress on Optical Science and Engineering, 1988, Hamburg, Germany
Abstract
The principle of the high precision optical surface sensor (HIPOSS) is based on the focus detection of the critical angle method. This sensor has two sensing ranges in its characteristic curve, a precision range and a wide range. The precision range is used for an ordinal ultra-high precision profilometer, of which sensitivity is better than 0.2nm rms with about 2μm measuring scope. On the other hand, relatively large linear measuring range of around 20μm with 1nm resolution can be achieved by use of the wide range. Besides the two and three dimensional profilometer, each range of the HIPOSS can be used as a compact displacement sensor or a dynamic sensor of higher than 10kHz response such as in-process measurement for single point diamond turning control. The HIPOSS was designed to eliminate several errors especially from the surface inclination. Taking advantage of the function, an inclination angle of the surface can also be detected by the HIPOSS with about 1 minute of arc sensitivity.
© (1989) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Tsuguo Kohno "On A Few Functions Of HIPOSS (High Precision Optical Surface Sensor) And Their Applications", Proc. SPIE 1009, Surface Measurement and Characterization, (21 March 1989); https://doi.org/10.1117/12.949150
Lens.org Logo
CITATIONS
Cited by 2 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Sensors

Reflectivity

Mirrors

Objectives

Profilometers

Precision optics

Prisms

Back to Top