Paper
30 May 2017 Modification of LED radiation pattern by implementation of 1D Fresnel structure in the surface
Ivana Lettrichova, Dusan Pudis, Agata Laurencikova, Peter Gaso, Lubos Suslik, Daniel Jandura, Jozef Novak
Author Affiliations +
Abstract
In this contribution, we present modification of far field of light emitting diode (LED) with implemented Fresnel structure in the LED surface. Fresnel structures were prepared in one-dimensional arrangement with two different foci f1 = 12.5 μm and f2 = 1 cm. Structures were etched directly in the LED emitting surface using electron beam lithography with the etched depth for the structure with f1 and f2 app. 200 nm and 400 nm, respectively. Due to application of these structures, LED far field narrowing was observed, which is documented by goniophotometer measurements. For the structure with f1 and f2, the intensity decrease for angles ±30° – ±50° is app. 3-4% and 5-6%, respectively, in comparison to the Lambertian profile.
© (2017) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Ivana Lettrichova, Dusan Pudis, Agata Laurencikova, Peter Gaso, Lubos Suslik, Daniel Jandura, and Jozef Novak "Modification of LED radiation pattern by implementation of 1D Fresnel structure in the surface", Proc. SPIE 10249, Integrated Photonics: Materials, Devices, and Applications IV, 102490T (30 May 2017); https://doi.org/10.1117/12.2265815
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Light emitting diodes

Goniophotometry

Electron beam lithography

Scanning electron microscopy

Solids

Diffraction

Optical testing

Back to Top