High Power CO Lasers And Their Application Potential

F. Maisenhalder

doi:10.1117/12.950506

20 June 1989 High Power CO Lasers And Their Application Potential

F. Maisenhalder

Proceedings Volume 1031, 7th Intl Symp on Gas Flow and Chemical Lasers; (1989) https://doi.org/10.1117/12.950506
Event: 7th International Symposium on Gas Flow and Chemical Lasers, 1988, Vienna, Austria

Abstract

Comparing the state of development of high power gas lasers for civil applications, it can be seen that the CO2 laser is a well established tool; the CO laser, however, essentially remained a laboratory device. Hence, the question arises whether there will be an advantage to develop high power CO lasers for industrial applications, too. After a brief recapitulation of the typical CO-related properties, to help answering this question, the application potential of the CO laser, will be discussed. There are several wavelength-related advantages of the CO laser like increased absorption depth in glasses and crystals increased focal power density, and reduced plasma shielding. Furthermore, transmissive optical materials have considerably improved values for absorption and damage threshold, and finally power transmission through optical fibers is much more realistic in the near future for the 5 μm spectral range. In contrast to the variety of promising applications is the number of experimentally verified ones. This is due to the fact that only a few lasers are existing in the power range and in the developmental stage to be used for applications. In experiments CO lasers demonstrated advantages in the field of cutting and drilling metals and uranium isotope separation. Lasers in the high power range are developed in Japan, in the Soviet Union and in Germany. The types of lasers investigated in these countries differ from each other by the methods of gas cooling and excitation. Comparisons between Co- and CO2 lasers show that the system efficiencies of CO lasers are slightly higher by a factor of 1.3; the operation costs of CO lasers are reduced by the same factor. Investment and operation costs can be reduced considerably if for the planned application a high focal power density is used. Furthermore, the volumes of CO and CO2 lasers are comparable at present and in the future.

Citation Download Citation

F. Maisenhalder "High Power CO Lasers And Their Application Potential", Proc. SPIE 1031, 7th Intl Symp on Gas Flow and Chemical Lasers, (20 June 1989); https://doi.org/10.1117/12.950506

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available