Paper
2 May 2005 Design and fabrication of microlens array for VCSEL to fiber coupling; Technical Digest
Seok-min Kim, Hongmin Kim, Jiseok Lim, Jeongwon Han, Shinill Kang
Author Affiliations +
Abstract
The microlens array is often used for increasing coupling efficiency in vertical cavity surface emitting lasers (VCSELs) to fiber coupling system. Among the various methods to couple VCSEL module with microlenses, a monolithic lithography integration is regarded as better candidate because the process is simple and suitable for mass production. In addition, one can avoid additional assembly process. In the present study, a microlens array with a lens diameter of 40mm and focal length of 150mm was designed to couple a single mode VCSEL array and optical fibers, and tolerance analysis was carried out. A microlens array for VCSEL to fiber coupling was integrated by a UV-transparent mold and a monolithic lithography integration system which utilizes micro UV-molding. Finally, the geometrical properties of the integrated microlens array and the insertion loss of VCSEL to fiber coupling was measured and analyzed.
© (2005) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Seok-min Kim, Hongmin Kim, Jiseok Lim, Jeongwon Han, and Shinill Kang "Design and fabrication of microlens array for VCSEL to fiber coupling; Technical Digest", Proc. SPIE 10315, Optifab 2005: Technical Digest, 103150S (2 May 2005); https://doi.org/10.1117/12.605942
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Vertical cavity surface emitting lasers

Microlens array

Fiber couplers

Lithography

Assembly tolerances

Fiber coupled lasers

Fiber lasers

RELATED CONTENT


Back to Top