Temperature-dependence of polymer grating couplers for single-mode waveguides

Pei Li; Stanislav Sherman; Maher  Rezem; Kirsten  Honnef; Hans Zappe

doi:10.1117/12.2289444

23 February 2018 Temperature-dependence of polymer grating couplers for single-mode waveguides

Pei Li, Stanislav Sherman, Maher Rezem, Kirsten Honnef, Hans Zappe

Proceedings Volume 10535, Integrated Optics: Devices, Materials, and Technologies XXII; 105351R (2018) https://doi.org/10.1117/12.2289444
Event: SPIE OPTO, 2018, San Francisco, California, United States

Abstract

Polymer optical sensors have attracted significant scientific interest due to the advantages of flexibility and low- cost mass-production possibilities. A main challenge in integration of all-polymer systems is interfacing sensor parts to light sources and detectors. Coupling strategies such as end-facet coupling, 45° mirrors coupler and gratings coupler have been investigated. However, facet polishing is complicated for large flexible foils, while 45° mirrors often require a metal reflection layer. Thus grating couplers have the biggest potential and are compatible with roll-to-roll processes. Polymers have higher thermo-optic-coefficients and thermal-expansion-coefficients compared to inorganic materials, making them very sensitive to temperature changes. Consequently, polymer grating couplers show a shift of the coupling angle with temperature and thus a decay of efficiency. We therefore present a temperature characterization of all-polymer based grating couplers on waveguides based sensors. Cost-effective manufacturing methods, including hot-embossing and spin-coating, were used for the fabrication of waveguides and gratings on PMMA foils. Single mode waveguides were realized by modifying the dimensions of their cross-section. Gratings with a period of 560 nm were subsequently bonded on the waveguides for input coupling. Thermal response was characterized by monitoring the coupling angle at different temperatures. Temperature dependences of the incident angle at two main peaks of 0.0027 °/K and 0.0054 °/K were determined respectively at the wavelength of 852 nm and a linear response over the evaluated range between 298 K and 323 K was observed, which opens up possible applications for on-chip temperature monitoring and thermal compensation when integrated with polymer sensors.

Citation Download Citation

Pei Li, Stanislav Sherman, Maher Rezem, Kirsten Honnef, and Hans Zappe "Temperature-dependence of polymer grating couplers for single-mode waveguides", Proc. SPIE 10535, Integrated Optics: Devices, Materials, and Technologies XXII, 105351R (23 February 2018); https://doi.org/10.1117/12.2289444

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available