Acceleration factor for damp heat testing of PV modules

Arun Bala Subramaniyan; Archana Sinha; Shantanu Pore; Hamsini Gopalakrishna; Rong Pan; GovindaSamy TamizhMani

doi:10.1117/12.2322051

17 September 2018 Acceleration factor for damp heat testing of PV modules

Arun Bala Subramaniyan, Archana Sinha, Shantanu Pore, Hamsini Gopalakrishna, Rong Pan, GovindaSamy TamizhMani

Proceedings Volume 10759, New Concepts in Solar and Thermal Radiation Conversion and Reliability; 107590B (2018) https://doi.org/10.1117/12.2322051
Event: SPIE Optical Engineering + Applications, 2018, San Diego, California, United States

Abstract

Interconnect Metallization System (IMS) degradation of photovoltaic (PV) modules is one among the major degradation modes in the field caused by higher operating temperatures and daily/seasonal/cloud cyclic temperatures. Usually, the acceleration factor (AF) and activation energy (E_a) of IMS degradation are determined based on power degradation data. Using power degradation data may not be fully representative of a specific mechanism since the power drop could be caused by multiple degradation mechanisms. In this paper, we have used the series resistance (R_s) increase, instead of power degradation, to obtain the AF and E_a for IMS degradation mechanism in the damp heat test (85°C/85% RH). The degradation data were sourced from our qualification damp heat test database with 94 crystalline silicon modules, and two field databases of Arizona and New York climates with 615 and 236 crystalline silicon modules, respectively. A 3-step approach was implemented to determine the AF for the damp heat testing. First, the AF for the field-to-field degradation was determined based on R_s degradation rates of the modules in Arizona and New York. Second, the E_a was determined based on the AF, and hourly differences in field-to-field module temperature and relative humidity. Third, the AF was determined based on R_s increase in the damp heat test and the E_a determined using the field data in the second step. A model based on modified Peck’s equation was used to determine a generic AF for the R_s increase in qualification damp heat testing. This approach is useful to predict the service lifetime and reliability of PV modules for specific climatic regions.

Conference Presentation

Citation Download Citation

Arun Bala Subramaniyan, Archana Sinha, Shantanu Pore, Hamsini Gopalakrishna, Rong Pan, and GovindaSamy TamizhMani "Acceleration factor for damp heat testing of PV modules", Proc. SPIE 10759, New Concepts in Solar and Thermal Radiation Conversion and Reliability, 107590B (17 September 2018); https://doi.org/10.1117/12.2322051

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available