Paper
11 January 2019 Design of SiC mirror subsystem of a space-based astronomy telescope
Author Affiliations +
Proceedings Volume 10837, 9th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Large Mirrors and Telescopes; 108370A (2019) https://doi.org/10.1117/12.2504931
Event: Ninth International Symposium on Advanced Optical Manufacturing and Testing Technologies (AOMATT2018), 2018, Chengdu, China
Abstract
A Φ450mm primary mirror subsystem of a space-based astronomy telescope was designed with mass, optical surface distortion and reflectivity requirement. The open-back primary mirror was made of pressure-less sintering silicon carbide, light-weighted at a ratio of approximately 70%. Three side supporting invar flexure bipods were designed to minimize the assembling stress and the thermal stress. The high reflection was obtained from the optical surface cementite. The mirror weighted 7kg and the reflectivity was 97% after optical polishing. The mirror subsystem was precisely assembled under the strict technical condition. The optical test with interferometer showed that the optical surface distortion is less than 1/40λ rms, which met the critical optical requirements for the primary mirror of the space-based astronomy telescope.
© (2019) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Liang-jie Feng, Jiao-teng Ding, and Gang-yi Zou "Design of SiC mirror subsystem of a space-based astronomy telescope", Proc. SPIE 10837, 9th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Large Mirrors and Telescopes, 108370A (11 January 2019); https://doi.org/10.1117/12.2504931
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Mirrors

Silicon carbide

Distortion

Telescopes

Space telescopes

Astronomy

Optical instrument design

RELATED CONTENT


Back to Top