Presentation + Paper
1 March 2019 Advances in UV-A and UV-C LEDs and the applications they enable
Author Affiliations +
Abstract
UV-A LEDs have seen efficiencies reach almost 70% and a substantial reduction in cost over the last few years. These trends have enabled UV-LED-based curing to become a mainstream application with most LEDs being driven at 1-2 A/mm2. At the same time novel applications, such as high-volume 3D Printing requiring higher power from UV LEDs have started to emerge. To address these applications, and to improve system speed in traditional applications, Luminus Devices has developed UV-A LEDs that can be operated at up to 4 A/mm2 which is the highest current density of any commercially available LED on the market. These next generation LEDs are very reliable and at 4 A/mm2 enable up to 74% higher power than LEDs driven at 2 A/mm2. This paper presents the performance characteristics of these nextgeneration LEDs, the novel and emerging applications they enable and provides a roadmap for future performance gains. UV-C LEDs are starting to become commercially viable but have low wall-plug efficiencies of 2%-4% and power levels reaching 100 mW. UV-C LEDs are not only replacing lamps but creating entirely new markets. The current status of UV-C LEDs is presented along with a discussion of the applications the LEDs will enable over the next 2-3 years.
Conference Presentation
© (2019) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
M. Kumar "Advances in UV-A and UV-C LEDs and the applications they enable ", Proc. SPIE 10940, Light-Emitting Devices, Materials, and Applications, 1094008 (1 March 2019); https://doi.org/10.1117/12.2507074
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Light emitting diodes

Blue light emitting diodes

Lamps

3D printing

Ultraviolet radiation

Ultraviolet light emitting diodes

Reliability

Back to Top