Paper
18 December 2018 Optical fiber-based ionizing sensors preparation
Author Affiliations +
Proceedings Volume 10976, 21st Czech-Polish-Slovak Optical Conference on Wave and Quantum Aspects of Contemporary Optics; 109760N (2018) https://doi.org/10.1117/12.2518406
Event: 21st Czech-Polish-Slovak Optical Conference on Wave and Quantum Aspects of Contemporary Optics, 2018, Lednice, Czech Republic
Abstract
We present construction development of new ionizing radiation sensors based on silica optical fibers. Optical fiber based ionizing sensors can be prepared from silica optical fibers by adding a scintillation material. Scintillation material can be in liquid, powdered or crystalline structure. Then the sensor construction has to be prepared with focus to the scintillation material structure and to efficiency of ionizing radiation to scintillation radiation conversion. The best conversion efficiency is usually for the crystalline or powdered types of scintillation material structure. The liquid scintillation material has smaller efficiency conversion and can be used in combination with microstructure fiber mainly. Our first set-ups of silica optical fiber based ionizing radiation sensors with powdered and crystalline structure of the scintillation material are presented.
© (2018) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Bretislav Mikel and Michal Jelinek "Optical fiber-based ionizing sensors preparation", Proc. SPIE 10976, 21st Czech-Polish-Slovak Optical Conference on Wave and Quantum Aspects of Contemporary Optics, 109760N (18 December 2018); https://doi.org/10.1117/12.2518406
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Ionizing radiation

Scintillation

Sensors

Optical fibers

Scintillators

Crystals

Gamma radiation

Back to Top