Extension of the registration possibilities and determination of the positioning precision of a multi-scale fringe projection system

Sebastian Metzner; Tino Hausotte

doi:10.1117/12.2558029

18 May 2020 Extension of the registration possibilities and determination of the positioning precision of a multi-scale fringe projection system

Sebastian Metzner, Tino Hausotte

Author Affiliations +

Proceedings Volume 11397, Dimensional Optical Metrology and Inspection for Practical Applications IX; 1139703 (2020) https://doi.org/10.1117/12.2558029
Event: SPIE Defense + Commercial Sensing, 2020, Online Only

Abstract

For providing holistic and complete dataset of sheet bulk metal-formed parts, an optical detection with a fringe projection system is useful. By combining several sensors with varying measuring ranges, the workpiece is captured with adapted spatial resolution depending on the forming zone and geometric requirements. The sensors are registered by a two-dimensional point calibration and registration process. The registration process has already been shown in.¹ In this article, the calibration procedure is transferred to the measurement setup with three fringe projection sensors with different measurement resolution. A calibration plate with dot patterns is applied to the positioning unit, which is a high precision hexapod in this set-up. This extended calibration plate allows a continuous control of the registration quality as the sensors are able to capture the calibration plate at any time. For determining the positioning accuracy of the hexapod, a procedure following the DIN EN ISO 10360-3 procedure with three spheres mounted on the hexapod was investigated. Therefore the hexapod was fixed at a coordinate measuring machine Zeiss UPMC 1200 and moved in all 6 degrees of freedom. After each movement, the spheres were measured with a probe, which allows the absolute position precision to be calculated. Comparison of the measurements with the specified translation and rotation movement of the hexapod show a positioning precision of less than 10 µm in the positioning directions x and y.

Citation Download Citation

Sebastian Metzner and Tino Hausotte "Extension of the registration possibilities and determination of the positioning precision of a multi-scale fringe projection system", Proc. SPIE 11397, Dimensional Optical Metrology and Inspection for Practical Applications IX, 1139703 (18 May 2020); https://doi.org/10.1117/12.2558029

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available