Poster + Paper
13 December 2020 Methods used for testing of large-size mirrors surface figure and on and off-axis surfaces optical parameters at the stage of figuring
Aleksandr P. Semenov, Magomed A. Abdulkadyrov, Nikolay S. Dobrikov, Alexandr N. Ignatov, Vladimir E. Patrikeev, Vitaliy V. Pridnya, Andrey V. Polyanchikov, Ruslan K. Nasyrov
Author Affiliations +
Conference Poster
Abstract
JSC LZOS applies various mechanical and optical methods to test optics at all stages of figuring, from milling and grinding to polishing stage. Computer Generated Holograms (CGH) are successfully applied at the polishing stage for the following purposes: testing of large-size optical components, on- and off-axis surfaces; alignment with respect to interferometer; defining of an aspherical surface optical vertex position with respect to the geometrical center for optical systems alignment. All this allows manufacturing of large-size aspherical on- and off-axis astronomical and space mirrors with high accuracy.
© (2020) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Aleksandr P. Semenov, Magomed A. Abdulkadyrov, Nikolay S. Dobrikov, Alexandr N. Ignatov, Vladimir E. Patrikeev, Vitaliy V. Pridnya, Andrey V. Polyanchikov, and Ruslan K. Nasyrov "Methods used for testing of large-size mirrors surface figure and on and off-axis surfaces optical parameters at the stage of figuring", Proc. SPIE 11451, Advances in Optical and Mechanical Technologies for Telescopes and Instrumentation IV, 114513E (13 December 2020); https://doi.org/10.1117/12.2561082
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Mirrors

Off axis mirrors

Surface finishing

Computer generated holography

Optical alignment

Polishing

Geometrical optics

Back to Top