Presentation + Paper
21 August 2020 In-situ measurement technique of contamination morphology under vacuum and low temperature condition
Author Affiliations +
Abstract
Molecular contamination phenomena depend on temperature. For example, the morphology of a contaminant can change from a uniform film to droplets. The authors believe that the surface morphology of thin-film contamination affects optical transmittance and reflectance of camera lenses and other sensors, so it is important to gain a better understanding of the morphology of contamination. The authors investigated a simple measurement technique to determine molecular contamination morphology in a vacuum and at low temperatures using a CMOS camera sensor chip. The CMOS camera operates down to −60°C, which covers our range of interest (i.e., from −60°C to room temperature). Furthermore, using a combination of the camera sensor and the optical measurement setup in a vacuum chamber, the morphology and optical transmittance were measured simultaneously. The advantages of the technique are that the equipment is inexpensive and can be installed in many chambers now in use.
Conference Presentation
© (2020) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Yuta Tsuchiya, Bruno Bras, Kazunori Shimazaki, Eiji Miyazaki, Yugo Kimoto, and Riccardo Rampini "In-situ measurement technique of contamination morphology under vacuum and low temperature condition", Proc. SPIE 11489, Systems Contamination: Prediction, Control, and Performance 2020, 114890M (21 August 2020); https://doi.org/10.1117/12.2567560
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Sensors

Cameras

Transmittance

Contamination

CMOS sensors

CMOS cameras

Temperature metrology

RELATED CONTENT


Back to Top