Presentation + Paper
21 August 2020 Evaluation of protection films for optics in space industry
Author Affiliations +
Abstract
Newly developed space instruments are increasingly efficient and accurate. One of the main drawbacks is that they are consequently more and more sensitive to contamination. Once integrated, optics are continuously exposed to cleanroom environment. Most of the time, cleaning operations are risky or even impossible considering coatings fragility or accessibility constraints. Thus even in cleanrooms, with the use of specific covers and/or the implementation of purging, inducing altogether stringent operational constraints, molecular and particulate contamination deposition appears to be unavoidable. Hence, the use of a protection film on the most critical optics during manufacturing assembly and tests would allow a significant reduction of the overall contamination levels or the release of the operational constraints to reach the same cleanliness target. This study presents the results obtained in the frame of a test campaign aiming at identifying and evaluating the most promising protection films (including varnishes, adhesive tapes and electrostatic films) dedicated to space instruments optics. Impacts on both molecular and particulate contamination were investigated together with associated effects on protected substrates (aspect, spectral properties, …). The best solution has been qualified at Airbus and is currently implemented on flight hardware.
Conference Presentation
© (2020) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
J. Eck, S. Fontorbes, M. Bonhomme, and Y. Goueffon "Evaluation of protection films for optics in space industry", Proc. SPIE 11489, Systems Contamination: Prediction, Control, and Performance 2020, 114890N (21 August 2020); https://doi.org/10.1117/12.2567283
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Contamination

Astronomical imaging

Optics manufacturing

Particle contamination

Adhesives

Aerospace engineering

Glasses

RELATED CONTENT

Assessment of an approach to printed polymer lenses
Proceedings of SPIE (May 11 2017)
Lens-blocking method for Opticam
Proceedings of SPIE (December 10 1992)
Cold lens blocking methods
Proceedings of SPIE (September 27 1993)
Developing And Qualifying Space Lighting Systems
Proceedings of SPIE (October 26 1989)
Membrane mirror deformed by electrostatic pressure
Proceedings of SPIE (November 21 2007)
Outgassing: an atypical approach
Proceedings of SPIE (September 27 1993)

Back to Top