New wavelength tuning strategy for realizing VCSEL wafers with highly uniform wavelength

Ryoichiro Suzuki; Hiroshi Motomura; Masayuki Fujiwara; Kazuki Nagasawa; Naoto Jikutani

doi:10.1117/12.2576970

5 March 2021 New wavelength tuning strategy for realizing VCSEL wafers with highly uniform wavelength

Ryoichiro Suzuki, Hiroshi Motomura, Masayuki Fujiwara, Kazuki Nagasawa, Naoto Jikutani

Proceedings Volume 11704, Vertical-Cavity Surface-Emitting Lasers XXV; 1170405 (2021) https://doi.org/10.1117/12.2576970
Event: SPIE OPTO, 2021, Online Only

Abstract

Precise lasing wavelength control of VCSELs is attractive for several applications: 3D sensing, atomic clock, laser pumping, and the like. The wavelength of commercially available VCSELs is typically varied for each chip. This is because the thickness of epitaxial layers inevitably varies on a wafer due to the distribution of temperature and gas flow. VCSEL users on the module side have tolerated the problem. Here, we propose the novel strategy for precise wavelength control of VCSELs with simple fabrication by applying multi-wavelength (MW) VCSEL. We proposed two ways to achieve that. One is uniform wavelength method on wafer, and another is wavelength selection method. In both concepts, MW-VCSELs with wavelength-tuning-layer (WTL) inside DBR are suitable. Uniform wavelength method is followed by three steps: 1) A lower DBR, a cavity consisting of active layers, a first top DBR, and a WTL are grown. 2) The dip wavelength of the Fabry-Perot cavity is measured over the wafer. The WTL thickness is processed as to cancel out the wavelength variation in the two-dimensional data, which is performed by photolithography and etching techniques. 3) A remaining second top DBR is formed by regrowth technique to achieve more uniform wavelength than epitaxial growth alone. In our experiment, the reduction of wavelength variation from 6.6 nm (epitaxy only) to 2.0 nm was demonstrated. The concept can provide large scale array with uniform wavelength. Therefore, it is advantageous on high power applications as well as applications in which VCSELs with precise lasing wavelength are required. In wavelength selection method, precise wavelength is obtained by selecting emitters that met wavelength specification from emitters that are formed with different wavelengths by applying MW-VCSEL technology.

Conference Presentation

Citation Download Citation

Ryoichiro Suzuki, Hiroshi Motomura, Masayuki Fujiwara, Kazuki Nagasawa, and Naoto Jikutani "New wavelength tuning strategy for realizing VCSEL wafers with highly uniform wavelength", Proc. SPIE 11704, Vertical-Cavity Surface-Emitting Lasers XXV, 1170405 (5 March 2021); https://doi.org/10.1117/12.2576970

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available