Paper
1 May 1990 Drying of ink jet images on plain papers
Art Gooray, Lawrence Agbezuge
Author Affiliations +
Proceedings Volume 1252, Hard Copy and Printing Technologies; (1990) https://doi.org/10.1117/12.19782
Event: Electronic Imaging: Advanced Devices and Systems, 1990, Santa Clara, CA, United States
Abstract
Ink jet printing demands that excess water on the surface of the printed substrate be removed within a set time. In addition, other requirements should be met: acceptable print quality, low sheet deformation, minimal strike-tnrough, minimal feathering. The set time is ictated by substrate path and substrate process speed. Mechanisms to remove the water from the surface are referred to as dryers. A slow drying rate can result in image offset or smear, excessive image spreading or penetration which will result in deformation due to stress relaxation. Typical drying mechanisms are: surface evaporation, diffusion of ink into the substrate or surface blotting . In the present study, various experimental methods and techniques for efficiently drying inkjet images printed with aqueous ink formulations on plain paper have been developed ana where applicable, numerical analysis have been correlated with experimental data.The drying methods which have been explored should be able to satisfy drying requirements of Ink Jet printers and copiers with a wide range of substrate throughput. Highlights of conductive, convective and infrared drying and combinations thereof are presented. The metrics for defining acceptable drying in terms of moisture content of paper and image offset density are discussed. Criteria for choosing the optimum dryer so as to optimize trade offs between power consumption, cost, size, architecture and efficiency are also discussed.
© (1990) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Art Gooray and Lawrence Agbezuge "Drying of ink jet images on plain papers", Proc. SPIE 1252, Hard Copy and Printing Technologies, (1 May 1990); https://doi.org/10.1117/12.19782
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Printing

Diffusion

Absorption

Safety

Image processing

Reflectors

Resistance

RELATED CONTENT

Thermal dye diffusion printing
Proceedings of SPIE (June 18 1993)
Trends of key materials for direct thermal papers
Proceedings of SPIE (July 01 1990)
Progress of color inkjet technology
Proceedings of SPIE (December 21 1999)

Back to Top