Paper
28 February 2024 Research on an accuracy improvement technology of ADC acquisition system based on pruning neural network
Zheng Fang, Minghu Zhang, Houping Zhou
Author Affiliations +
Proceedings Volume 13071, International Conference on Mechatronic Engineering and Artificial Intelligence (MEAI 2023); 130711T (2024) https://doi.org/10.1117/12.3025581
Event: International Conference on Mechatronic Engineering and Artificial Intelligence (MEAI 2023), 2023, Shenyang, China
Abstract
This paper introduces an algorithm for improving the accuracy of the ADC acquisition system based on pruning neural network, which can calibrate the errors caused by the analog-to-digital conversion module and other parts in the acquisition system, and effectively improve the accuracy of the ADC acquisition system. By using techniques such as neuron pruning, weight clustering, and parameter quantization, the network we trained greatly reduces hardware resource consumption while achieving the calibration effect of a fully connected neural network. It enables this network easier to deploy in embedded systems. The simulation results show that in the case of a signal input close to the Nyquist frequency, for a 12- bit 12.5MS/s ADC acquisition system, the ENOB can be increased from 5.31 to 8.83, and the SFDR can be increased from 46.3dB to 66.4dB.
(2024) Published by SPIE. Downloading of the abstract is permitted for personal use only.
Zheng Fang, Minghu Zhang, and Houping Zhou "Research on an accuracy improvement technology of ADC acquisition system based on pruning neural network", Proc. SPIE 13071, International Conference on Mechatronic Engineering and Artificial Intelligence (MEAI 2023), 130711T (28 February 2024); https://doi.org/10.1117/12.3025581
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Neural networks

Calibration

Analog to digital converters

Embedded systems

Artificial neural networks

Signal processing

Back to Top