Paper
5 June 2024 Implementation of a wristwatch for dose measurement based on CsI detector
Jiongrui Chen, Zhangjian Qin, Chengfeng Zhao
Author Affiliations +
Proceedings Volume 13163, Fourth International Conference on Mechanical, Electronics, and Electrical and Automation Control (METMS 2024); 131635W (2024) https://doi.org/10.1117/12.3030238
Event: International Conference on Mechanical, Electronics, and Electrical and Automation Control (METMS 2024), 2024, Xi'an, China
Abstract
We have implementation a wristwatch that utilizes a Silicon Photomultiplier (SiPM) and a CsI(Tl) crystal for radiation dose rate detection. Compared to traditional personal dosimeters, it offers advantages such as high detection efficiency and portability. The measurement module incorporates a scintillation detector, a composite material comprised of CsI(Tl) crystal and SiPM, complemented by a signal conditioning module that boasts a pulse shaping circuit. The wristwatch, utilizing the functionalities of the CH579M microcontroller and advanced design algorithms, can rapidly respond to sudden fluctuations in environmental radiation levels. After testing, the detector's signal-to-noise ratio was measured at 12 dB, with a pulse width of 25 μs. The actual measurement range of the wristwatch is from 0. 1 to 250 μSv/h.
(2024) Published by SPIE. Downloading of the abstract is permitted for personal use only.
Jiongrui Chen, Zhangjian Qin, and Chengfeng Zhao "Implementation of a wristwatch for dose measurement based on CsI detector", Proc. SPIE 13163, Fourth International Conference on Mechanical, Electronics, and Electrical and Automation Control (METMS 2024), 131635W (5 June 2024); https://doi.org/10.1117/12.3030238
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Sensors

Pulse signals

Silicon photomultipliers

Design

Microcontrollers

Signal detection

Power consumption

Back to Top