Paper
1 February 1992 Rugged hermaphroditic single-terminus connector
Bruce V. Darden, Bruce G. LeFevre, Vasilios E. Kalomiris
Author Affiliations +
Abstract
A rugged simplex hermaphroditic connector has been developed for use in tactical fiber-optic applications such as radar and radio remoting, and various robotic systems. The single-terminus connector is intended for use wherever bi-directional transmission is required. It was designed to operate while meeting severe environmental and mechanical conditions experienced in the field. Both multimode and single-mode designs of the connector have been developed. Connectors have insertion loss of less than 1 dB when installed on either 50/125 pm multimode fiber or single-mode fiber. In addition to low loss and ruggedness, connector design features include cable retention hardware which requires neither special tools nor adhesives, waterproofing seals, and ease of cleaning without special kits. The connector was designed to accommodate existing tactical cables whose diameters range from 2.5 to 4.0 mm, and is capable of withstanding tensile loads up to 1335 newtons. Operating temperature range is from -46°C to 71°C; storage temperature extremes are -57°C and 85°C. The new connector is small, being only 1.4 cm in diameter and 8.6 cm long, including bend limiter. It weights less than 30 gm. A complementary bulkhead receptacle is equally rugged and may be mounted on panels up to 6.4 mm thick. EMI shielding has been incorporated in the unit.
© (1992) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Bruce V. Darden, Bruce G. LeFevre, and Vasilios E. Kalomiris "Rugged hermaphroditic single-terminus connector", Proc. SPIE 1580, Fiber Optic Components and Reliability, (1 February 1992); https://doi.org/10.1117/12.135414
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Connectors

Fiber optic components

Humidity

Metals

Fourier transforms

Interfaces

Single mode fibers

Back to Top