Paper
15 February 1993 Practical comparison of three tomography algorithms using a simulated 3D flow field
Joseph C. Hsu, James D. Trolinger
Author Affiliations +
Abstract
Tomography is a technique known for integrating two-dimensional projections into three- dimensional objects. In our application, tomography is used to determine the three- dimensional gas density distribution from a set of two-dimensional interferograms. In an Aeroballistic Range, tomography can be used with multiple-view interferometry to obtain the density field between the shock wave and the model surface. A supersonic flow model is generated by computer code for a 10-degree half angel sharp cone traveling with an angle of attack. Two freestream Mach numbers, 3 and 5, are tested. The calculated indices of refraction are projected two-dimensionally to simulate the results obtained from projected holographic interferometry. Three algorithms based on pixels, a triangular mesh, and polynomial/Fourier decomposition, are used to invert the results tomographically into its three-dimensional flow field. The proficiency and the accuracy of each algorithm are compared under the same matrix inversion process.
© (1993) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Joseph C. Hsu and James D. Trolinger "Practical comparison of three tomography algorithms using a simulated 3D flow field", Proc. SPIE 1756, Interferometry: Applications, (15 February 1993); https://doi.org/10.1117/12.140798
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Reconstruction algorithms

Tomography

Interferometry

Computer simulations

Data modeling

3D modeling

Chemical elements

Back to Top