Paper
16 February 1993 Development of GaInAsP/GaAs strained-layer quantum-well diode lasers
Steven H. Groves, Zong-Long Liau, Susan C. Palmateer, James N. Walpole, Leo J. Missaggia
Author Affiliations +
Abstract
Diode lasers with InGaAs strained-layer quantum wells and GaInP cladding layers for operation at 980 nm have been investigated. Two types of device structure, differing in the optical-waveguide material have been grown by organometallic vapor phase epitaxy. Threshold current densities as low as 85 A/cm2 and differential efficiencies as high as 93% have been measured on broad-area devices. Mass transport of GaInP and GaInAsP alloys has been used to fabricate buried-heterostructure lasers with threshold currents as low as 3 mA and output powers of 30 mW/facet for uncoated devices. Threshold currents of 7 mA and single spatial mode output power in excess of 50 mW/facet have been obtained for uncoated, ridge-waveguide lasers.
© (1993) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Steven H. Groves, Zong-Long Liau, Susan C. Palmateer, James N. Walpole, and Leo J. Missaggia "Development of GaInAsP/GaAs strained-layer quantum-well diode lasers", Proc. SPIE 1788, Sources and Detectors for Fiber Communications, (16 February 1993); https://doi.org/10.1117/12.141096
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Gallium arsenide

Quantum wells

Indium gallium phosphide

Waveguides

Semiconductor lasers

Indium gallium arsenide

Sensors

RELATED CONTENT


Back to Top