Paper
4 May 1993 Gas lasers with coaxial electrodes for ultrahigh beam power
Author Affiliations +
Proceedings Volume 1810, 9th International Symposium on Gas Flow and Chemical Lasers; (1993) https://doi.org/10.1117/12.144642
Event: Ninth International Symposium on Gas Flow and Chemical Lasers, 1992, Heraklion, Greece
Abstract
A new design for a rf-excited CO2-laser uses coaxial electrodes. A high frequency blower located at one end of the electrode system generates a fast axial gas flow between the electrodes. The gas flow is reversed after passing the blower and moves back to the other end of the electrode system along the outer electrode, that carries a water-cooled heat-exchanger. So the gas reaches the other end of the electrode system with lower temperature and after a second reversal it again enters the cooling system. This kind of geometry then allows a very efficient cooling. Since the plasma has a hollow cylindrical shape, the extraction of radiation is not trivial. Several possibilities are available, e.g., a multipass-zig-zag-beam geometry. A theoretical estimation shows that this geometry, where the electrode system, gas flow and heat exchanger arrangement, and the resonator are integrated in a very rugged module, allows the user to obtain -- at least theoretically -- a beam power of 15 kW with a length of approximately 1 meter and an overall diameter of 70 centimeters.
© (1993) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Markus Bohrer and Dieter Schuoecker "Gas lasers with coaxial electrodes for ultrahigh beam power", Proc. SPIE 1810, 9th International Symposium on Gas Flow and Chemical Lasers, (4 May 1993); https://doi.org/10.1117/12.144642
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Electrodes

Plasma

Capacitance

Gas lasers

High power lasers

Laser development

Resonators

RELATED CONTENT


Back to Top