Paper
23 December 1994 Study of venous and carotid anastomoses in rats using an argon laser
Veronique L. Martinot, Valerie A. Mitchell, Serge R. Mordon, P. N. Pellerin, Jean Marc Brunetaud
Author Affiliations +
Proceedings Volume 2327, Medical Applications of Lasers II; (1994) https://doi.org/10.1117/12.197562
Event: International Symposium on Biomedical Optics Europe '94, 1994, Lille, France
Abstract
The present in vivo study was undertaken in order to evaluate the patency rate and histological aspect on 30 venous anastomoses and 30 carotid anastomoses in Wistar rats using a laser. An argon laser was used with the following parameters: 100 mW, 3 s, continuous mode, spot equals 200 micrometers (fluence equals 950 J/cm2, irradiance equals 320 W/cm2). The macroscopic aspect and patency rate were evaluated at different post-operative intervals (30 days and 60 days). In the venous group, the patency rate was 100% with no saccular pseudo aneurism. In the arteries group, the patency rate was 93% with 3 saccular pseudo-aneurisms and 2 thromboses. Histological studies noted slight and transitory modifications of the media in the arterial group. In the venous group, the modifications appeared under the endothelium with conjunctival hyperplasia. Since the procedure was similar in both groups the lack of pseudo-aneurism in the venous group can be explained by a lower intravascular pressure.
© (1994) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Veronique L. Martinot, Valerie A. Mitchell, Serge R. Mordon, P. N. Pellerin, and Jean Marc Brunetaud "Study of venous and carotid anastomoses in rats using an argon laser", Proc. SPIE 2327, Medical Applications of Lasers II, (23 December 1994); https://doi.org/10.1117/12.197562
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Argon ion lasers

Arteries

Veins

Laser applications

Medical laser equipment

Blood

Laser welding

Back to Top