Demonstration and modeling of a tapered-lensed optical fiber trap

Edward R. Lyons; Gregory J. Sonek

doi:10.1117/12.209020

12 May 1995 Demonstration and modeling of a tapered-lensed optical fiber trap

Edward R. Lyons, Gregory J. Sonek

Proceedings Volume 2383, Micro-Optics/Micromechanics and Laser Scanning and Shaping; (1995) https://doi.org/10.1117/12.209020
Event: Photonics West '95, 1995, San Jose, CA, United States

Abstract

Optical trapping is a novel technique that utilizes radiation pressure for the non-contact manipulation and control of micron sized particles including living cells and micro-organisms. Typically, optical trapping is performed using a high power microscope and a complicated optical setup to form a single beam optical gradient trap or `optical tweezers.' Recent work has demonstrated three dimensional optical trapping using the counterpropagating beams from two optical fiber cleaves. This results in a simple and low cost implementation of an optical trap. Our paper discuses a refinement of this technique using pigtailed 1.3 micrometers semiconductor lasers and tapered lensed optical fibers with hemispherically machined microlens ends. Our optical trap consists of two tapered fiber lenses separated by distances of between 100 and 400 microns, with optical power ranges between 2 and 40 mW. Adjusting the relative powers of the optical fibers allowed us to trap and position 3, 5 and 10 micron beads over axial distances of several hundred microns. Our refinements improve trap accessibility while simultaneously increasing the trap stability. We have also used a ray optics model to simulate the performance of the optical fiber trap and predict the forces generated throughout the trapping volume. Axial and transverse trapping efficiencies up to 0.1 are predicted. The model can be used to predict trap strength and stability for various combinations of fiber spacings and particle sizes. Experimental observations of trapping and manipulation of 3 micrometers , 5 micrometers , and 10 micrometers beads are also presented and compared to the model.

Citation Download Citation

Edward R. Lyons and Gregory J. Sonek "Demonstration and modeling of a tapered-lensed optical fiber trap", Proc. SPIE 2383, Micro-Optics/Micromechanics and Laser Scanning and Shaping, (12 May 1995); https://doi.org/10.1117/12.209020

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available