Paper
22 May 1995 MTF measurement system that simulates IOL performance in the human eye
Jim-Son Chou, Larry W. Blake, John M. Fridge, D. Alan Fridge
Author Affiliations +
Abstract
MTF data can be a dependable criterion for assessing the performance of an optical system if the testing is done under conditions that closely resemble the actual application. For testing IOL performance, this requirement can be met by inserting the lens in a suitable eyes model. A dynamic eye model in which the corneal power can be varied to simulate the range of conditions found in different human eyes is ideal, but if the vergence angle is chosen carefully, a fixed eye model can be sufficient. For the resulting MTF data to be valid, it is necessary to consider the entire spread function of the system. In the case of a multifocal IOL, the failure to accurately sample the complete spread function is a major source of measurement errors. The detector must be able to characterize in considerable detail the central maximum of the in focus segment. At the same time it must also deal with the complex and diffuse `halo' from the out of focus segment of the lens. Additionally, it must be able to measure the stray light found beyond the halo, that results from the transitions between the various zones of the multifocal lens. Test systems based on the direct measurement of MTF have a substantial advantage in these cases where the spread function is large and complex.
© (1995) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Jim-Son Chou, Larry W. Blake, John M. Fridge, and D. Alan Fridge "MTF measurement system that simulates IOL performance in the human eye", Proc. SPIE 2393, Ophthalmic Technologies V, (22 May 1995); https://doi.org/10.1117/12.209854
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Modulation transfer functions

Eye models

Eye

Sensors

Spatial frequencies

Image quality

Optical testing

Back to Top